Scroungers C.C. 1964 Falcon Drag Car
+28
1/2done
xycho_wraith
Cratethis
LOCO64
silveradolady
puddin head
The Skirt
Admin
falconwagon62
fuel10922
46underconstruction
Lady rebel
FalconEddie1964
tc fairlane
RustyKarr
junkyard junky
big dogs 42
magicman_1968
nitrowarrior
tiresmoke55
chev_hotrod
junkyardjeff
1.8t89Jetta
Mr. Fabulous
LRS30
JRiggs
6-71Kid
RebStew
32 posters
Page 7 of 14
Page 7 of 14 • 1 ... 6, 7, 8 ... 10 ... 14
Stuff
Hi guys, John here, president of the Ohio Valley Chapter Falcon club, do you need anything that I migh have for the Falcon project? I have parted out 3 or 4 more falkoons in the last few months?? Hope all is well and hope o see her runnig at the pumpkin run!!!
John 513-312-8799
John 513-312-8799
Re: Scroungers C.C. 1964 Falcon Drag Car
John right now I think we have everything to get her going other than a windshield. We just need to get some free time to put her together.
RebStew- Scrounger's Pitbull On Nitrous
- Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky
HOT ROD Falcon...
I most likely have a used one, FREE if you want it.....well maybe another bottle of the hot stuff good in my chilie....
John
John
RebStew wrote:John right now I think we have everything to get her going other than a windshield. We just need to get some free time to put her together.
Re: Scroungers C.C. 1964 Falcon Drag Car
LOL I do have an extra bottle of Scroungers hot sauce if ya want it....falconwagon62 wrote:I most likely have a used one, FREE if you want it.....well maybe another bottle of the hot stuff good in my chilie....
JohnRebStew wrote:John right now I think we have everything to get her going other than a windshield. We just need to get some free time to put her together.
free windshield is always a plus..
RebStew- Scrounger's Pitbull On Nitrous
- Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky
Race Koooon
I am home now, Yes I have a GOOOD Used one for ya'll Call me when you want it, I only keep them I don't sell them...free to club members......have the back window too if you need them......John 513-312-8799
RebStew wrote:LOL I do have an extra bottle of Scroungers hot sauce if ya want it....falconwagon62 wrote:I most likely have a used one, FREE if you want it.....well maybe another bottle of the hot stuff good in my chilie....
JohnRebStew wrote:John right now I think we have everything to get her going other than a windshield. We just need to get some free time to put her together.
free windshield is always a plus..
Re: Scroungers C.C. 1964 Falcon Drag Car
I got the mallory unilite out of the 460 going in the 66 and I found a correct adapter to get rid of the spreadbore carb used on the 460s,it does not have the same bolt pattern as a QJ or thermoquad and those cheap adapters kind of make them run like crap. My 77 F150 with a 460 had the spreadbore originally and someone adapted a QJ to it and with the adapter plus the original spacer it was a dog,I used that adapter to mount the holley I got off Tim and it runs alot better but the adapter is ordered and should be here late next week. The adapter was 58 dollars plus some change and I got it from summit and the part number is TRD-2199,its not like the cheap adapter that is open around all four parts as this one is made with all four ports. Jeff
junkyardjeff- BANNED
- Number of posts : 1467
Registration date : 2007-10-10
Age : 63
Location : Dayton Ohio
Re: Scroungers C.C. 1964 Falcon Drag Car
Anyone want to work on the gasser Friday or Saturday night? It's getting cool enough that we don't have to have a heat stroke. 12th or 13th? We could get the rearend sanded down, painted and put together if nothing else.
Last edited by RebStew on October 31st 2008, 2:14 am; edited 1 time in total
RebStew- Scrounger's Pitbull On Nitrous
- Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky
Re: Scroungers C.C. 1964 Falcon Drag Car
I'd be up for comming down after work on friday
6-71Kid- Scrounger
- Number of posts : 918
Registration date : 2007-10-10
Age : 37
Location : Dayton Ohio
Windsheild
Y'all come on down now, ya hear........
Come get this windsheild......
John
Come get this windsheild......
John
RebStew wrote:Anyone want to work on the gasser this Friday or Saturday night? It's getting cool enough that we don't have to have a heat stroke. 12th or 13th? We could get the rearend sanded down, painted and put together if nothing else.
Re: Scroungers C.C. 1964 Falcon Drag Car
no one other than Cole can make it? Should we hold off for a few more weeks and just make this a winter project? what do you guys think?
John as soon as I get a free chance I'll try to give you a call about the windshield. I'm still playing catch up around here
John as soon as I get a free chance I'll try to give you a call about the windshield. I'm still playing catch up around here
RebStew- Scrounger's Pitbull On Nitrous
- Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky
Re: Scroungers C.C. 1964 Falcon Drag Car
Anyone want to ride up this week sometime to get the windshield?
Nov, 8th will be the next work session Saturday starting at 1pm. Anyone who wants to get their hands dirty let me hear from ya. I'd like to get the rearend set up in it and rolling on it's slicks.
We need to take a grinder with a wire wheel to the housing while someone else is cleaning the pig and axels. Paint it, stick it together all while someone else is ripping out the old rearend.
Nov, 8th will be the next work session Saturday starting at 1pm. Anyone who wants to get their hands dirty let me hear from ya. I'd like to get the rearend set up in it and rolling on it's slicks.
We need to take a grinder with a wire wheel to the housing while someone else is cleaning the pig and axels. Paint it, stick it together all while someone else is ripping out the old rearend.
Re: Scroungers C.C. 1964 Falcon Drag Car
Let me know when you want to go up Steve ill go with you give me a call.
big dogs 42- 1000 post club
- Number of posts : 1145
Registration date : 2007-12-14
Age : 69
Location : corbin ky
Re: Scroungers C.C. 1964 Falcon Drag Car
might try and make it.
i think we should have the work sessions on thursday nights.... but what do i know...
i think we should have the work sessions on thursday nights.... but what do i know...
JRiggs- Scrounger
- Number of posts : 3505
Registration date : 2007-10-09
Age : 44
Location : erlanger ky
Re: Scroungers C.C. 1964 Falcon Drag Car
we tried that but everyone has to work the next day so we couldn't get anyone to do anything. we will try this and see how it works out. If anyone wants to stop over before than and get the rearend we could set it up in my garage behind the house.JRiggs wrote:might try and make it.
i think we should have the work sessions on thursday nights.... but what do i know...
Is anyone willing to buy the gasket? Anyone else wanting to spring for the gear oil?
RebStew- Scrounger's Pitbull On Nitrous
- Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky
3et me know
I'll put the word out if you need help, maybe puddin Head me and a few other falcon nuts will come help ya....is it a 8" or 9" I might have a FREE gasket for ya.......I buy them by the hand full, I do have Fords after all!!!!
John 513-312-8799
John 513-312-8799
RebStew wrote:we tried that but everyone has to work the next day so we couldn't get anyone to do anything. we will try this and see how it works out. If anyone wants to stop over before than and get the rearend we could set it up in my garage behind the house.JRiggs wrote:might try and make it.
i think we should have the work sessions on thursday nights.... but what do i know...
Is anyone willing to buy the gasket? Anyone else wanting to spring for the gear oil?
Re: Scroungers C.C. 1964 Falcon Drag Car
It'll have a 9inch in her
RustyKarr- Hot Rod Builder
- Number of posts : 963
Registration date : 2007-10-10
Location : A-Town
Re: Scroungers C.C. 1964 Falcon Drag Car
hmmm she love that
The Skirt- Grease monkey
- Number of posts : 228
Registration date : 2007-10-27
Age : 60
Location : newport, ky
Re: Scroungers C.C. 1964 Falcon Drag Car
OMG skirt i can't belive you made that statment!!
big dogs 42- 1000 post club
- Number of posts : 1145
Registration date : 2007-12-14
Age : 69
Location : corbin ky
Re: Scroungers C.C. 1964 Falcon Drag Car
What are ya doing with John? lol
Last edited by RebStew on October 30th 2008, 4:41 pm; edited 1 time in total
RebStew- Scrounger's Pitbull On Nitrous
- Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky
Re: Scroungers C.C. 1964 Falcon Drag Car
that was 2 funny
JRiggs- Scrounger
- Number of posts : 3505
Registration date : 2007-10-09
Age : 44
Location : erlanger ky
Re: Scroungers C.C. 1964 Falcon Drag Car
no takers on anyone springin' for some gear oil? The gasser will need some 5 and dime stuff to get her going
RebStew- Scrounger's Pitbull On Nitrous
- Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky
Re: Scroungers C.C. 1964 Falcon Drag Car
Nov 8th is on a Saturday. Small quarters so be prepared to work if ya come. Who's coming?
The Falcon leaving it's hole
Randy Vickers only charged us gas money for the tow. Thanks Randy!
The Gasser is in my garage ready for her work session.
We will be trying to get a few things done. Pulling the side glass, getting the rearend set up and installed and some metal work and welding on the fenderwells and firewall.
Amy's going out tonight to gab pop and food. Any requests?
The Falcon leaving it's hole
Randy Vickers only charged us gas money for the tow. Thanks Randy!
The Gasser is in my garage ready for her work session.
We will be trying to get a few things done. Pulling the side glass, getting the rearend set up and installed and some metal work and welding on the fenderwells and firewall.
Amy's going out tonight to gab pop and food. Any requests?
RebStew- Scrounger's Pitbull On Nitrous
- Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky
Re: Scroungers C.C. 1964 Falcon Drag Car
I will be there
big dogs 42- 1000 post club
- Number of posts : 1145
Registration date : 2007-12-14
Age : 69
Location : corbin ky
Re: Scroungers C.C. 1964 Falcon Drag Car
We didn't have a bad work crew going on. Myself, Chad, Charlie, Dennis, Ronnie, Corey, Benjamin, Johnny Stamper, Cole, Doug, Jeff and even Terry(Puddin head himself) drove down from Ohio to help out. Before we got dirty Amy fixed a bunch of pizza, cookies, brownies and candy in general. lol We watched a new hot rod flick I had just got in the mail, while we grubbed out.
A littlle meeting about club politics went on and then off to the garage. A small meeting about the future look and what we need from the gasser and then it was on.
When we first hit the gasser it was like a swarm of killer bees. Some of us could find a spot to get to because it was covered.
Front fender had to come back off
The rest of the glass was coming out one way or the other.
Terry with his knowledge of Falcons came in to play a few times.
A littlle meeting about club politics went on and then off to the garage. A small meeting about the future look and what we need from the gasser and then it was on.
When we first hit the gasser it was like a swarm of killer bees. Some of us could find a spot to get to because it was covered.
Front fender had to come back off
The rest of the glass was coming out one way or the other.
Terry with his knowledge of Falcons came in to play a few times.
Last edited by RebStew on November 23rd 2008, 4:24 am; edited 2 times in total
RebStew- Scrounger's Pitbull On Nitrous
- Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky
RebStew- Scrounger's Pitbull On Nitrous
- Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky
Page 7 of 14 • 1 ... 6, 7, 8 ... 10 ... 14
Similar topics
» club drag car?? 64 Falcon?
» Sending the 1964 Falcon Sprint off to be painted + more!
» Scroungers invade Thornhill Drag Strip in 2013
» Hey you Falcon Scroungers!
» Falcon Eddie's 1970-1/2 Falcon 4 door driver build
» Sending the 1964 Falcon Sprint off to be painted + more!
» Scroungers invade Thornhill Drag Strip in 2013
» Hey you Falcon Scroungers!
» Falcon Eddie's 1970-1/2 Falcon 4 door driver build
Page 7 of 14
Permissions in this forum:
You cannot reply to topics in this forum
|
|