Re: Scroungers C.C. 1964 Falcon Drag Car

by LRS30 October 18th 2011, 1:13 am

That looks to have a red dash, unless someone panted it, and that does'nt look like my old axle either, Those axles had a 5 on 4.5 bolt pattern, and that looks like a chevy wheel on there which I think is 5 on 4.75 b.p. Hell who knows...

by falconwagon62 August 26th 2012, 4:28 am

Steve,

Call me about this tomorrow, I think I may tackle the axle instrall, joey may take longer than I want...I wanna see if you kept any notes....

by Admin August 26th 2012, 7:15 pm

Notes? Nah it's all seat of the pants but we can do it!

by falconwagon62 August 27th 2012, 1:08 am

So with the Speedway Springs and hangers, I think I can figure it out, I am starting to pull and switch the rear end this weekend....

by Reb Stew August 27th 2012, 4:51 am

falconwagon62 wrote:So with the Speedway Springs and hangers, I think I can figure it out, I am starting to pull and switch the rear end this weekend....

Let me know when you get the front end stuff and I'll stop up. One of the new guys has a set of 40 Ford spindle on here for sale. I think that is what the Speedway kit uses unless you are just buying the whole kit as a package deal.

by falconwagon62 August 27th 2012, 5:22 am

I have the Econoline axle I am using, only buying hangers, springs ect....budget build.....

by Reb Stew August 27th 2012, 5:27 am

Gotcha ya

by Reb Stew October 23rd 2012, 2:18 am

If this wouldn't have been such a conflict of interest I would have bought this car from the club. I miss it.

by 911TAZZ October 23rd 2012, 3:10 am

Was reading the build up on the falcon. makes me want to find a gasser project. hate that it ended up like it did.

by Reb Stew October 23rd 2012, 3:51 am

Shooting to build one in the next two years if all goes right. Crazy to have to plan out things years in advance but too many other things need done around the Stewart's household. Very Happy

by 911TAZZ October 23rd 2012, 3:57 am

Same here. planning a truck project for Carolyn. Been looking but it will be at least February or march before I can even think about it.

by junkyard junky October 23rd 2012, 4:35 am

Reb Stew wrote:Shooting to build one in the next two years if all goes right. Crazy to have to plan out things years in advance but too many other things need done around the Stewart's household.

Still moving to Campbellsville?

by Cratethis October 23rd 2012, 5:42 am

I wish we still had the drag car. I hadn't been in the club long and we had a work session on it. It was a lot of fun hanging with everyone. I learned a lot just from watching the different things we were doing on it.

by JRiggs October 23rd 2012, 5:54 am

round 2 :

http://cincinnati.craigslist.org/pts/3277620416.html

by Reb Stew October 23rd 2012, 6:29 am

junkyard junky wrote:
Reb Stew wrote:Shooting to build one in the next two years if all goes right. Crazy to have to plan out things years in advance but too many other things need done around the Stewart's household.

Still moving to Campbellsville?

If all goes right.

by junkyardjeff September 7th 2013, 11:42 pm

I ran into the guy that owns it the other night and does anyone still have the side windows.

by Reb Stew September 7th 2013, 11:56 pm

Should have been in the trunk or floorboard. has he done anything to it?

by junkyardjeff September 8th 2013, 12:51 am

The floors are in and the frame tied,9 inch has been narrowed and spring are inside the frame rails and done other structural work to the rear frame area. Have not seen it yet and does anyone know what the front axle is from.

by Reb Stew September 8th 2013, 3:28 am

Wavy tube Dodge if I remember right.

by falconwagon62 September 10th 2013, 9:34 pm

I have a set of Sedan rear windows if needed....with bottom track still on......513-312-8799

by Sponsored content