Re: 1987 Olds Cutlass

by JRiggs January 21st 2010, 5:16 pm

not sure what is going on with ole betsy. she hasnt ran right in quit a few days. she knows shes been replaced i think that might be the problem.... lol looks like it might be time to put a chevy in it...... cheers

by RebStew January 21st 2010, 6:33 pm

JRiggs wrote:not sure what is going on with ole betsy. she hasnt ran right in quit a few days. she knows shes been replaced i think that might be the problem.... lol looks like it might be time to put a chevy in it......

Now you are talkin'!

by Lady rebel January 21st 2010, 7:45 pm

Now your on the right train for sure!!

by Glenn January 21st 2010, 10:04 pm

you can probably pick one of those chevelle motors for a dime! lol no but that would be a good choice though.

by magicman_1968 January 21st 2010, 10:08 pm

Oh yea they are on every corner Very Happy

by JRiggs January 21st 2010, 10:17 pm

i built one a few years back still sitting in the garage.... ive rotated it by hand and its been sitting with plenty of lube within the motor...... has new everything......

by Glenn January 21st 2010, 10:23 pm

magicman_1968 wrote:Oh yea they are on every corner

by JRiggs January 25th 2010, 1:11 am

well it was only the electric choke wire had came undone....

by JRiggs March 28th 2010, 8:46 pm

installed some 6inch pioneer in the rear deck. sounds pretty good. i got a set of 6.5 kicker separates that i need to install somewhere in the car. i'm thinking in the kick panels but its going to stick out so far. these speakers have one heck of a magnet on the back.

by JRiggs May 17th 2010, 1:27 am

put some new spark plugs wires on old betsy yesterday.

by JRiggs June 1st 2010, 4:35 pm

got a set of 70's all chrome cutlass rally's on saturday from the outsider himself. mr. randy vickers. thank you sir, and a big thanks to rebstew for hauling them home and thanks to my son for unloading them....

by JRiggs June 1st 2010, 5:33 pm

also started sanding down the cutlass. wish i had done this during the winter but 2 cold, i know need to get this in primer asap, to many shows coming up that id like to go to...

by Admin June 1st 2010, 6:19 pm

We can shoot some primer on it sometime this week if you get it ready. Do you have a gun? Get it sanded and taped up and give me a call.

by Admin June 1st 2010, 6:24 pm

If you want to do it tonight let me know. You would have to stay up late. We could start after dinner but you need to wait and spray about 9 or 10 at night. It's too hot in the day and this primer lays out better when there is less humidity

by JRiggs June 1st 2010, 7:13 pm

i have a spray gun yes. i dont have all of the car sanded yet either. i have a few holes here and there that needs bondo. i have the passenger side windows taped up. did that on sunday. soon as i get it ready ill yell. thanks

by JRiggs June 2nd 2010, 8:09 pm

i'm going to try and get in the garage tonight to get the rest sanded down, windows taped up, and start on my hood.

by SMOKNZ June 3rd 2010, 5:27 am

Give me a holler, I will come over and help u sand. I need something to do at night. I usually don't go to bed until around 3 or 4 in the morning.

by Admin June 3rd 2010, 5:44 am

He's already in for the night. He has to work. Corey was over there with him for a while. Not sure what all they got done.

by JRiggs June 3rd 2010, 6:38 pm

got most of the car sanded down thanks corey. i was out there from 6 till 930. Got all of the windows taped up still have to do the chrome at the bottom, wheel wells and the chrome strip in the bumper

by JRiggs June 4th 2010, 5:28 pm

worked on it for about an hour last night. HAVE I MENTIONED THAT I AM REALLY BEGINNING TO HATE ALL THIS CHROME ON THIS CAR .LOL its a pain to tape up....

by Vickers June 4th 2010, 7:01 pm

take some pic j riggs sounds like u r getten her done

by JRiggs June 4th 2010, 7:02 pm

i went an bought some scuff pads at autozone and within an hours skinny kenny schmidt pulls up with a hand full of them for free what a pal.... lol

by RebStew June 8th 2010, 1:44 am

When do you want to shoot it? Do you need some help or want to do it yourself. Trying to get anything out of you is like trying to clip the toe nails of a silverback gorilla

by JRiggs June 8th 2010, 3:10 am

Steve Stewart Yes I do need some help. I wanted to shoot it but guess i'm kinda scared lol, yeah i know if i get runs just sand it back down. I'll be back in the garage tomorrow about 9 or so just for an hour possible 2. gotta work the next day.

want to work on my hood. 2. would love to have some help on that 2....

by RebStew June 8th 2010, 3:16 am

tomorrow you need help right?? what time?? 9pm?

by Sponsored content