{ Scaring babies and little old ladies with open headers since 1964 }
Welcome to the Scroungers Car Club web site.
It cost nothing to register Sign up and speak up!

Sorry for the wall. This keeps our web site clean of SPAM and other unwanted parties so the true gear heads can enjoy him/her self.
You must register to see most of this forum. Register or if you have already registered just log in to see what's going on.

Join the forum, it's quick and easy

{ Scaring babies and little old ladies with open headers since 1964 }
Welcome to the Scroungers Car Club web site.
It cost nothing to register Sign up and speak up!

Sorry for the wall. This keeps our web site clean of SPAM and other unwanted parties so the true gear heads can enjoy him/her self.
You must register to see most of this forum. Register or if you have already registered just log in to see what's going on.
{ Scaring babies and little old ladies with open headers since 1964 }
Would you like to react to this message? Create an account in a few clicks or log in to continue.
{ Scaring babies and little old ladies with open headers since 1964 }

Fun, Friendship and Hot Rods!


Good place to buy metal for the gasser project

3 posters

{ Scaring babies and little old ladies with open headers since 1964 } :: BENCH RACING :: Shooting the breeze

Go down

Good place to buy metal for the gasser project Empty Good place to buy metal for the gasser project

Post by Reb Stew January 3rd 2014, 8:56 pm

Where is the best place to buy metal? We need a piece of 16 gauge 4x8 or 4x10 and some round stock for roll bar tubing. 1-3/4" OD x .134" Wall mild steel tubing or close.. Some place in the greater Cincinnati tri state area. I normally get my stuff over on River Road but it seems like they have to order in a lot of stuff lately. We bought some stuff further north on the out skirts of Cincy for the rail the club built but it's been so many years I have no idea what it was call or even what the city was.
Reb Stew
Reb Stew
National President

Number of posts : 7905
Registration date : 2012-04-08
Age : 104
Location : Looking in your window

Back to top Go down

Good place to buy metal for the gasser project Empty Re: Good place to buy metal for the gasser project

Post by pepboys speedshop January 3rd 2014, 9:04 pm

boone steel in Walton on chandler drive

pepboys speedshop
BANNED

Number of posts : 204
Registration date : 2013-12-19
Age : 61
Location : Florence Kentucky

Back to top Go down

Good place to buy metal for the gasser project Empty Re: Good place to buy metal for the gasser project

Post by Reb Stew January 3rd 2014, 9:18 pm

Thanks I'll check them out.
Reb Stew
Reb Stew
National President

Number of posts : 7905
Registration date : 2012-04-08
Age : 104
Location : Looking in your window

Back to top Go down

Good place to buy metal for the gasser project Empty Re: Good place to buy metal for the gasser project

Post by pepboys speedshop January 3rd 2014, 9:33 pm

ask for Ronnie there

pepboys speedshop
BANNED

Number of posts : 204
Registration date : 2013-12-19
Age : 61
Location : Florence Kentucky

Back to top Go down

Good place to buy metal for the gasser project Empty Re: Good place to buy metal for the gasser project

Post by falconwagon62 January 3rd 2014, 11:22 pm

Ackerman Steel Northand Blvd Tri-County 513-648-0880

Tell them John Howard their Saw Blade guy told you to call

Short pieces, off 747 Metal Super Markets 513-942-8222

falconwagon62
falconwagon62
Scrounger

Number of posts : 2607
Registration date : 2008-06-08
Age : 59
Location : Trenton, Ohio

http://www.ovcfca.com

Back to top Go down

Good place to buy metal for the gasser project Empty Re: Good place to buy metal for the gasser project

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

{ Scaring babies and little old ladies with open headers since 1964 } :: BENCH RACING :: Shooting the breeze

 
Permissions in this forum:
You cannot reply to topics in this forum