Ford manual trans, bellhousings, flywheels and etc

I found some ford parts that came off two parts truck that I junked out a couple of years ago. I think they were a 72 and 79. Both V8's. Two bellhousings, two flywheels with clutches, two transmissions, Fan blade and pulley, starter, alt with wiring harness. $180

EDIT: I forgot to add that the transmissions go with this stuff.

pulled some numbers and measurements off the flywheels, bellhousings and trans.

1) Flywheel : 14-13/16 inches in diameter. Clutch disc is 11".
2) Bellhosuing : Says sherfield DSBA-6394-AA
3) Flywheel 15-1/2 Inches in diameter Clutch disc is 11 inches
5) Trans with shifter : RF-C5TR TA040 WI on the tail shaft and D2AB 7006 on the side of the housing
6) 4 speed trans: 603606 and on the other side D&DB - 7006-A-A 286

Any of those trans bolt up to a 64 292 Y block?

I don't know. Only fords I work on is model t's through flatheads.