Re: Tranny trouble.... HELP

by magicman_1968 January 21st 2010, 3:41 pm

Cut it off flush and wipe some mud over it and smooth it and paint it Very Happy

by RebStew January 21st 2010, 4:12 pm

I thought those where just a pressed pin but I may be wrong.

by magicman_1968 January 21st 2010, 4:16 pm

They are but i was talkin about gettin rid of the whole nub Very Happy

and make it look like a floor shift column

by CustomCabby January 21st 2010, 4:17 pm

magicman_1968 wrote:Cut it off flush and wipe some mud over it and smooth it and paint it

Was planning on doing that with the sleeve but I need to find out how to get the pin out of the shifter itself then I can go to work on the sleeve part.

by RebStew January 21st 2010, 4:18 pm

Yeap. Smooth it out, paint it and stick a clamp and tach around it. Very Happy

by RebStew January 21st 2010, 4:19 pm

Should just be a pin. Find a punch or a small scew driver and beat it out.

by junkyardjeff January 22nd 2010, 5:49 am

I have two 3 speed with overdrive trans from 80s trucks that will bolt up,need at least 3.50 gears for them to work good.

by CustomCabby January 23rd 2010, 3:18 am

I got the pin out and have yet to work on the sleeve but as far as the stick is concerned, man am I ever glad I did it.... It's actually more enjoyable to drive now.

by RebStew January 23rd 2010, 3:57 am

customcabby wrote:I got the pin out and have yet to work on the sleeve but as far as the stick is concerned, man am I ever glad I did it.... It's actually more enjoyable to drive now.

I figured you would like it alot more.

by Sponsored content