Gasser Meets (time to wrench)
5 posters
Page 2 of 2
Page 2 of 2 • 1, 2
Re: Gasser Meets (time to wrench)
I'm booked all weekLRS30 wrote:going wednesday to fill the argon anybody have time to do some cutting and grinding this week????
RebStew- Scrounger's Pitbull On Nitrous
- Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky
Re: Gasser Meets (time to wrench)
I am looking forward to helping out after Christmas. I will be off from the 22nd till after the first of the year.
fuel10922- Master mechanic
- Number of posts : 433
Registration date : 2007-12-07
Age : 54
Location : Georgetown, Kentucky
Back to the Garage
All right you slacker's(myself included)! It's time to get back to the garage, any ideas on nights that we can get some work done on the gasser? If we could get the motorplates, engine block and tranny case over here we could make some good headway.... I'm gonna start working with my brother during some days but I will be free in the evening's, so how bout it who's up for making some spark's.. Let me know when and lets get these other parts together and lets get hacking.....Ryan
Re: Gasser Meets (time to wrench)
the weekends are better for me but I can make it whenever. I will bring over the engine and trans next time I come.
RebStew- Scrounger's Pitbull On Nitrous
- Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky
Re: Gasser Meets (time to wrench)
Well it look's as if I'm back into the working class (for a little bit any how).. But if anybody wants to get together one evening to do some work on that shelf, I mean Falcon Gasser I got in my garage let me know, we can try to set up some time one night or a weekend day let me know and I will set my schedule to work around some garage time... Where do we stand on a small block, Block for mock up? That way if we can get a block that trans case and the motor plates we will be able to get some serious work done... Ferrel was kind enough to fill my Argon tank on the welder ($50 I did'nt have at the moment), so we are ready to rock......Either call or post if and when anybody can make it....Also if anybody has some scrap sbc headers we could really use some to make a set for the Falcon...
Re: Gasser Meets (time to wrench)
I have my cherry picker back at Riggs garage. we have about a week worth of work and we will be done with the picker then it can come to your garage with the engine and mock up tranny. I've been busy these last few weeks but we will hit it hard real soon
RebStew- Scrounger's Pitbull On Nitrous
- Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky
Re: Gasser Meets (time to wrench)
Ok it's set Wednesday evening from 4:30 on who's in to do some work on the old Falcon????Does anybody have a truck we can use to move a cherrypicker, and were gonna need to set up a time with Rigg's to get the block from him and get with Steve to get the trans mount, I should have enough steel to make brackes and a cross member... Oh yhea we also need the motor plates, and bolts to mount it them to the block...I'm STOKED to get in the garage again.....Ryan
Re: Gasser Meets (time to wrench)
if Dennis will let us use the picker we can get it in my truck. have you talked to him about it?
RebStew- Scrounger's Pitbull On Nitrous
- Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky
cherry picker
No problem guys
big dogs 42- 1000 post club
- Number of posts : 1145
Registration date : 2007-12-14
Age : 69
Location : corbin ky
Re: Gasser Meets (time to wrench)
if anyone wants to mess around with the gasser we will be at Ryan's house at 4:30 Wensday 1-23-08. hopefully we can get the steering hooked up..
RebStew- Scrounger's Pitbull On Nitrous
- Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky
Re: Gasser Meets (time to wrench)
It's a date I'm leaving the Southgate House at 4 so I should be here by 4:30-4:45
Re: Gasser Meets (time to wrench)
Wensday 2-6-08 we are having our weekly work session. we are going to try to get the front end finished up. if you want to help out stop out at Ryans house. we will be there @ 5:30.
I found a set of hood pins I forgot I had. we need 3 more sets. anyone have any laying around?
I found a set of hood pins I forgot I had. we need 3 more sets. anyone have any laying around?
RebStew- Scrounger's Pitbull On Nitrous
- Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky
Re: Gasser Meets (time to wrench)
Tuesday MARCH 4th I'll be home around 5:30 will this be a good time to try to pop the engine in????We will need the CHerry picker... Let me know.....
Page 2 of 2 • 1, 2
Similar topics
» Upcoming Swap Meets....
» What color should the gasser be?
» Scroungers C.C. 1964 Falcon Drag Car
» Falcon Gasser on E-bay
» few Gasser pics
» What color should the gasser be?
» Scroungers C.C. 1964 Falcon Drag Car
» Falcon Gasser on E-bay
» few Gasser pics
Page 2 of 2
Permissions in this forum:
You cannot reply to topics in this forum