The Phoenix
+13
JESTER64
911TAZZ
Marty042
Reb Stew
Cratethis
TurboPinto
Arieldouglas
LRS30
Admin
JRiggs
Z-YOU
RebStew
hotrodaaron77
17 posters
Page 4 of 9
Page 4 of 9 • 1, 2, 3, 4, 5, 6, 7, 8, 9
Re: The Phoenix
you gonna help me tune it wat carb should i get or should i try to get mine fixed?
hotrodaaron77- Scrounger
- Number of posts : 473
Registration date : 2010-11-11
Age : 44
Location : Taylor Mill
Re: The Phoenix
If I can get time. I can't find the time to get the 49 done right now.
RebStew- Scrounger's Pitbull On Nitrous
- Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky
Re: The Phoenix
Well I'm gonna tear my motor down again got my head gaskets from Butler's. While I have my heads off wat can I do to make them better I have about 300 to play with and remember I'm putting the 125 shot. On. Any ideas
hotrodaaron77- Scrounger
- Number of posts : 473
Registration date : 2010-11-11
Age : 44
Location : Taylor Mill
Re: The Phoenix
Why are ripping the motor down when it runs? Leave it alone and enjoy it for a while. Did it blow a head gasket?
Take that 300 and find some mags and ditch those factory rims.
Take that 300 and find some mags and ditch those factory rims.
RebStew- Scrounger's Pitbull On Nitrous
- Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky
Re: The Phoenix
Not sure got my Carb set right and and went to make sure it run good I got on it pretty good and it smoked white out the exhaust it still has plenty of power and does not smoke when I drive normal it just happened that. One time amd I just don't want to hurt anything plus I have the gaskets
hotrodaaron77- Scrounger
- Number of posts : 473
Registration date : 2010-11-11
Age : 44
Location : Taylor Mill
Re: The Phoenix
dropped 3 inches,,,,,,,,
hotrodaaron77- Scrounger
- Number of posts : 473
Registration date : 2010-11-11
Age : 44
Location : Taylor Mill
Re: The Phoenix
How about a full side shot. I think those wheels prbably look pretty good after all.
Arieldouglas- TN Chapter President
- Number of posts : 1915
Registration date : 2011-07-03
Age : 65
Location : Watertown, TN
Re: The Phoenix
i will still has factorys on front still waiting for adapters from summit
hotrodaaron77- Scrounger
- Number of posts : 473
Registration date : 2010-11-11
Age : 44
Location : Taylor Mill
Re: The Phoenix
blocks that jbs10 gave me, wat u think
hotrodaaron77- Scrounger
- Number of posts : 473
Registration date : 2010-11-11
Age : 44
Location : Taylor Mill
Re: The Phoenix
Took the ta into school today. When i bought it from reb it had flintstone floorboards, so i bought some metal and pop riveted it in. Fast forward ten years i am ready to weld these pieces in so at school tonight i took the interior out and drilled the old rivets out, tom i cut and bend the metal maybe even start welding will see,, it took me about thirty min to get all the interior out,,,,,,,,,,
hotrodaaron77- Scrounger
- Number of posts : 473
Registration date : 2010-11-11
Age : 44
Location : Taylor Mill
Re: The Phoenix
that thing needs a few cut coils in the front
JRiggs- Scrounger
- Number of posts : 3505
Registration date : 2007-10-09
Age : 44
Location : erlanger ky
Re: The Phoenix
JRiggs wrote:that thing needs a few cut coils in the front
YEP!
Arieldouglas- TN Chapter President
- Number of posts : 1915
Registration date : 2011-07-03
Age : 65
Location : Watertown, TN
Re: The Phoenix
Really hoping mama will buy 2 inch drop springs for Xmas. Don't want to cut my springs they are still good and solid
hotrodaaron77- Scrounger
- Number of posts : 473
Registration date : 2010-11-11
Age : 44
Location : Taylor Mill
Re: The Phoenix
what brand are u wanting....
JRiggs- Scrounger
- Number of posts : 3505
Registration date : 2007-10-09
Age : 44
Location : erlanger ky
Re: The Phoenix
hotchkis makes a set for 230.00 i really hadnt looked at anything else, any suggestions?
hotrodaaron77- Scrounger
- Number of posts : 473
Registration date : 2010-11-11
Age : 44
Location : Taylor Mill
Re: The Phoenix
you only need the front better jump on these.......
http://cincinnati.craigslist.org/pts/2606683923.html
http://cincinnati.craigslist.org/pts/2606683923.html
JRiggs- Scrounger
- Number of posts : 3505
Registration date : 2007-10-09
Age : 44
Location : erlanger ky
Re: The Phoenix
If you lower the front you may as well take those headers off. You will end up dragging every time you go out for a drive. Those cars have no ground clearance to begin with. Drop them down and it's drag city.
RebStew- Scrounger's Pitbull On Nitrous
- Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky
Re: The Phoenix
I know they rub now over speed bumps with it now. Lol
hotrodaaron77- Scrounger
- Number of posts : 473
Registration date : 2010-11-11
Age : 44
Location : Taylor Mill
Re: The Phoenix
welded, seam sealed and por 15, before and after,,,,,,,, I still have to seam seal the bottom then put my peel and seal down then my carpet. I love school
hotrodaaron77- Scrounger
- Number of posts : 473
Registration date : 2010-11-11
Age : 44
Location : Taylor Mill
Re: The Phoenix
Now how will you stop with no hole to stick you feet through?
RebStew- Scrounger's Pitbull On Nitrous
- Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky
Re: The Phoenix
use my knees,,,,,,,,,,lol
hotrodaaron77- Scrounger
- Number of posts : 473
Registration date : 2010-11-11
Age : 44
Location : Taylor Mill
Re: The Phoenix
peel and seal baby lol,,,,,,, after talking to reb the other day i measured my tire mine is 9 and half inch footprint,,,,
hotrodaaron77- Scrounger
- Number of posts : 473
Registration date : 2010-11-11
Age : 44
Location : Taylor Mill
Re: The Phoenix
You squeezing that 1/2" aren't ya?
RebStew- Scrounger's Pitbull On Nitrous
- Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky
Page 4 of 9 • 1, 2, 3, 4, 5, 6, 7, 8, 9
Page 4 of 9
Permissions in this forum:
You cannot reply to topics in this forum
|
|