race car parts list

WHAT WE NEED
straight axel
front springs
ladder bars
sheet of steel for the floors and?
lexan
moon tank
line lock
1/2 fuel line
brake lines
trans lines
trans cooler
bondo
hood pins
front seat
radiator
drive shaft loop
windshield
windshield seal
back glass seal
side window door chanel to keep glass from hitting the post
battery disconnect switch
trunk mounted battery box and cables
battery
steering wheel
front rims
back rims
front tires
back tires
front shocks
rear shocks
rearend
perches for rearend
wire to wire the car
paint for body
primer for body
rear bumper
engine
trans
driveshaft
headers
tach
oil gauge
water gauge
rev limiter
metal to connect the frame
.
what else do we need. let me know what you have and I will turn it green to show we don't need it.

Don't anybody buy any body supplies, I get a hellluva discount, so spare grinding discs sand paper and such is always a great help.Once I get the T OYO out of my garage I will have room for the Falcon if we want to work on hanging the front end and connecting the frame.....I got heat and 220 for my welder/air compressor....so everybody searc there square tubing pile......

i know a lot of guys may want to run a Chevy but right now no one has one. so we are open to anything?? how about a 460? Vickers has a line on one. he says $100.00 and the 170 engine that was in the car may buy it. it has no intake and no exhaust manifolds.or ????
Jeff has a 460 that is running. may need the carb rebuilt or replaced. a C6 trans, the driveshaft, the radiator, and an after market dizzy. PLUS a 9" housing that is out of an early "Stang. it would need the brake stuff and the pig but I think Doug has a 390 geared pig we may be able to get.
he wants $300.00 bucks and some help getting it out. now for the bad. I'm busted and X~Mas is coming. I can't swing the cash. I may be able to come up with some but not anywhere near all of it. I may be able to trade my old car trailer for it but I would really like to keep my trailer. this is really too good of a deal to pass up. I sure wish we could come up with some cash. any ideas? everyone against using a Ford? I'm open for ideas. he said he doesn't have to have the money all at once but I still don't want to have to pull 3 bills out of my pocket later. I'm funny about owing people money. it would drive me nuts owing someone something for a long period of time.

I don't have any cash but I can help him get it out.

6-71Kid wrote:I don't have any cash but I can help him get it out.

that would help out a lot.. thanks Cole. I should be able to make it up too if we do it

I have two electric fans to offer, not period pieces buy will keep the motor cool...\\

can we use this at all.

I just talked to HAMMER N DOLLY (Mike ) from the HAMB he said he knows where there is a FORDOR with a good windshield and good parts we can pull off for a case of beer.....lol
It's outside Oldenburg Indiana if anybody is interested in going to get it next week or at least look at it....Ryan

LRS30 wrote:I just talked to HAMMER N DOLLY (Mike ) from the HAMB he said he knows where there is a FORDOR with a good windshield and good parts we can pull off for a case of beer.....lol
It's outside Oldenburg Indiana if anybody is interested in going to get it next week or at least look at it....Ryan

A couple of razor blades to cut the seal and she would fall right out

thats what I was thinking...

this would be nice to have. cheap too. in ohio so we could pick it up. are we going to run a front bumper?
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=150180568973&fromMakeTrack=true&ssPageName=VIP:Watchlink:middle:us

hey capt, need to update this we have a battery its on your porch unless it isnt good enough. lol.....

also we have that fuel line or what ever we can use it for.

Hey dad you got a long enough list I think you could repair a couple cars with that one

know we dont need another car for parts. but i did make a call to my cousin he has a complete 64 falcon minus motor and tranny he wants $500.00 for it.


just thought id throw that out there.

If we go with a sbc I think the elky has a turbo350 in it I would be willing to get rid off.I just need a engine host to get it out.

6-71Kid wrote:If we go with a sbc I think the elky has a turbo350 in it I would be willing to get rid off.I just need a engine host to get it out.

what are you going to use for a trans in the Elky?

I got a 700r4 I'm going to stick in it for now but eventually it will find a manual in it.

OK here I go, My brother just found a 1958 Chev. 283 that will fit the bill for his Hot Rod so he is going to picked it up and now I have gained control of the sbc that is on the stand in my garage, yes its a small displacement anemic 305 but its a start and its free to the club. No this will not get us into the 10's yet alone the 13's..... But its a start if everyone agree's to this than we have an engine. If not let me know if anybody else has an engine to donate, and this thing will sit on my stand for another year...lol. Its just a thought I personally think it would make a good learning engine for those guy's who have never been on the 1320 we do not need to get anybody killed we can always pull it in favor of another hopped up SBC if one comes along just a thought guy's and the price is right.....Ryan...p.s. let me know what everyone think's?

Sound like a plan and with sbc if you set it up for one you set it up for all.

Vickers just called me. he said he wanted to donate a rearend to the gasser. he's not sure if it's a 8" or a 9" he said he got it for his Falcon but today he bought a disk brake 9' for his. he said we can have this if we want it. it is complete drum to drum with new brakes. we will need to check it out to see what it is and what gear it has in it. Jeff also has that 9" at his house. so I guess we have a rearend when we are ready for it. whichever one we use.

This thing is really coming together parts wise....I love when a plan starts to gain some speed....My brother talked to a graphic artist buddy of his and he said when we are ready he will doo some lettering if we want(freebie,zero,zilch,natta,) sorry had to do it...I just have to give him a hand getting his 54 Stude Comamnder running so he can go cruising with us this upcoming year...We need to come up with a cool gasser name for the door. The Kentucky Shaker,....The scrounger think of some names guys and I will give them to him so he can work up a style of lettering that will work on the car....

So is everyone in agreement on the SBC???? If not let me know, I'm having a urge to start a low budget project of my own...Since it's looking like I'm not gonna ride scooters anymore, I'm thinking the next best thing a nice 2 seater T just for me and the misses to tool around in.
[img]
Something along these lines....

that's a cool bucket. the way the pole is running looks like a chevy is going in. if you need the engine we can use it for mock up then find one for the gasser. I think the Chevy will be the way to go. if we use it for a mock up for the mounts and headers we will have the car already set up when we put one in it.
what on line for the next wrench date? weld in the front spring mounts? when do you want to mess with it again?

Anytime....name a date...as far as the engine goes I'm still dreaming about doingthis so the engine is the clubs....

RebStew wrote:that's a cool bucket. the way the pole is running looks like a chevy is going in. if you need the engine we can use it for mock up then find one for the gasser. I think the Chevy will be the way to go. if we use it for a mock up for the mounts and headers we will have the car already set up when we put one in it.
what on line for the next wrench date? weld in the front spring mounts? when do you want to mess with it again?

I dont know if it helps or Not, but i have a extra 350 clean and bare block, that can be used for mock up if you guys need it,, i can drop it off at your house,, it has a hole in the cylinder so its a bad block but like i said its nice and clean, and its lite to move around,, let me know if it can be used,,,