SBC 350 question

OK here is what I found out, my brother's friend has a SBC he wants to sell, what do you Chevy guys think?

Here we go
Casting Number is : 3932386 from what I found it is a 68-9, 350, 300/350hp 4 bolt main which would make it a LT-1 or 4 also same casting number as a 302
VIN: 191w412148
Suffix: Vo115HA (69 350 manual Trans 300 hp 4 Barrel)


Heads CAsting Number: 333882 76cc 1.94/1.50 (came on 350 or 400)

Previous owner said he has receipts for install of 2.02 1.94 valves worked up with heavier springs and was , ported, decked, polished, seats are titanium."(Or so he says I have not seen yet to varify).

If any of you Chevy guys can break this down for me and tell me if my research is correct or not, please let me know, it also has a newer Edelbrock low rise intake and carb(no idea of what cfm it is).
He has driven the vehicle with this engine in it says it runs good, what would a good price be on this?

VO115HA looks like a H A code in the book says 350 1969 manual trans chevelle.

OK a little more detective work turns out this is a
1=Chevy
9=1969
W=Willow Run Mich.
412148=Serial # of car



V=Flint Mich. Engine Plant
0115= Jan 15
HA= Chevelle, CAmaro, or Nova, 300 hp, 350 ci,4 bbl carb(which is gone along with the intake) 10.25:1 Compression

Any Idea as a VAlue on it? or Should I buy it keep it and use it?

it's hard to put a price on stuff like this because it's all over the board in price range depending on who is selling it. if it's not going to hurt your pocket book it sounds like a good engine. I've seen stuff like this go from anywhere from 300 to 800 bucks.
thing is that these 350's are getting harder and harder to run across. the days of walking down the street and buying a $50.00 car with a good running 350/350 are gone. if it's not too much I'd grab it..

I could be mistaking but the 67-69 Camaro's had some Z blocks? yes. Just a thought. 350 are always easy to sell let me know if you dont buy it and what it is available for

Bill