03 Sierra Build Thread
2 posters
Page 1 of 1
03 Sierra Build Thread
Hey sure, why not, might as well right
<Evil grin>
<Evil grin>
Last edited by relaxednoma on June 21st 2012, 1:45 pm; edited 1 time in total
relaxednoma- Floor sweep
- Number of posts : 98
Registration date : 2009-01-28
Age : 41
Location : NKY
Re: 03 Sierra Build Thread
*sigh*
No thats not mine in the video...yet. Has the exact same cam and setup that I'm going for.
Basics:
03 5.3 LM7 / 4L60E Z71 ECSB
Serves duty as daily driver, parts hauler, trailer hauler, and everything else.
Torsion lift keys in front
3 inch Bodylift
20x9's with a toyo proxies 305/50/20 (wanting to trade/sell to a set of 35 12.50 M/T's!).
Edelbrock lift/level shocks all around.
billet grilles, party of 5.
grillshell painted black
esky doorhandles and painted bezels
SS t-gate bezel (OEM Smoothed) w/ chrome handle
tinted of course
from cats back, 3 inch pipe to a spintech pro street dumped over axle with 6 inch SS tip
frame hole plugs
black projector headlights/turn signals.
6k HID's in fogs and lows
LED switchbacks in turn signals
LED bulbs in taillights
Black LED 3rd brakelight
sprayed in bed liner
roll up tonneu
random interior LED lights (moar brighta)
LM487 flasher module ($45 on ebay rather then $70 @ autozone, fixes fast flash from LED bulbs)
Parts I have, to install
gap guards for the rear
vette servo for 1-2 shift, timid at doing this (yeah I'll admit it!)
3157 sockets to convert DRL's to turnsignal/running light w LED switchbacks
fuel filter and fuel filter fix-it line (good job GM!)
Future Plans
35 12.50 20 A/T or M/T
stainless steel headers and catless y-pipe
cammed
LS7 springs
3k stall
TBSS intake manifold swap
polished MAF & Throttle body
regeared.
3-4 shift servo and springs.
here's some random pics. The prowler orange will be from mid doorhandles down, split with the black by a simple charcoal graphic.
Prowler orange intake, yeah, mainly for looks lol
Not bad for out of a can in the garage and some elbow grease
No thats not mine in the video...yet. Has the exact same cam and setup that I'm going for.
Basics:
03 5.3 LM7 / 4L60E Z71 ECSB
Serves duty as daily driver, parts hauler, trailer hauler, and everything else.
Torsion lift keys in front
3 inch Bodylift
20x9's with a toyo proxies 305/50/20 (wanting to trade/sell to a set of 35 12.50 M/T's!).
Edelbrock lift/level shocks all around.
billet grilles, party of 5.
grillshell painted black
esky doorhandles and painted bezels
SS t-gate bezel (OEM Smoothed) w/ chrome handle
tinted of course
from cats back, 3 inch pipe to a spintech pro street dumped over axle with 6 inch SS tip
frame hole plugs
black projector headlights/turn signals.
6k HID's in fogs and lows
LED switchbacks in turn signals
LED bulbs in taillights
Black LED 3rd brakelight
sprayed in bed liner
roll up tonneu
random interior LED lights (moar brighta)
LM487 flasher module ($45 on ebay rather then $70 @ autozone, fixes fast flash from LED bulbs)
Parts I have, to install
gap guards for the rear
vette servo for 1-2 shift, timid at doing this (yeah I'll admit it!)
3157 sockets to convert DRL's to turnsignal/running light w LED switchbacks
fuel filter and fuel filter fix-it line (good job GM!)
Future Plans
35 12.50 20 A/T or M/T
stainless steel headers and catless y-pipe
cammed
LS7 springs
3k stall
TBSS intake manifold swap
polished MAF & Throttle body
regeared.
3-4 shift servo and springs.
here's some random pics. The prowler orange will be from mid doorhandles down, split with the black by a simple charcoal graphic.
Prowler orange intake, yeah, mainly for looks lol
Not bad for out of a can in the garage and some elbow grease
relaxednoma- Floor sweep
- Number of posts : 98
Registration date : 2009-01-28
Age : 41
Location : NKY
Reb Stew- National President
- Number of posts : 7905
Registration date : 2012-04-08
Age : 104
Location : Looking in your window
Re: 03 Sierra Build Thread
decided after not having a 6.5 in the door on the drivers side yesterday, since I got the truck, that I'd go ahead and put the OEM bose piece, that was supposed to be GMFS specific in. Well it's not, so I ordered the adaptor plates, which will be helpful when I order new 6.5's for the doors.
Found this:
Ended with this:
Found this:
Ended with this:
relaxednoma- Floor sweep
- Number of posts : 98
Registration date : 2009-01-28
Age : 41
Location : NKY
Re: 03 Sierra Build Thread
updated - 20x12 Gear Alloy 726B -44 offset w/ 33 12.50 20 Toyo Open Country MT
relaxednoma- Floor sweep
- Number of posts : 98
Registration date : 2009-01-28
Age : 41
Location : NKY
Similar topics
» 55 Chevrolet Build Thread
» 01 Sonoma Build Thread
» 77 Ford F100 Build Thread
» 1993 GMC Sierra 87K miles
» Ferrell Baggodonuts Project
» 01 Sonoma Build Thread
» 77 Ford F100 Build Thread
» 1993 GMC Sierra 87K miles
» Ferrell Baggodonuts Project
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|