{ Scaring babies and little old ladies with open headers since 1964 }
Welcome to the Scroungers Car Club web site.
It cost nothing to register Sign up and speak up!

Sorry for the wall. This keeps our web site clean of SPAM and other unwanted parties so the true gear heads can enjoy him/her self.
You must register to see most of this forum. Register or if you have already registered just log in to see what's going on.

Join the forum, it's quick and easy

{ Scaring babies and little old ladies with open headers since 1964 }
Welcome to the Scroungers Car Club web site.
It cost nothing to register Sign up and speak up!

Sorry for the wall. This keeps our web site clean of SPAM and other unwanted parties so the true gear heads can enjoy him/her self.
You must register to see most of this forum. Register or if you have already registered just log in to see what's going on.
{ Scaring babies and little old ladies with open headers since 1964 }
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Curious what you would do?

+10
pegasus
Mr. Fabulous
falconwagon62
Blue Eyed Devil
Chris55
SMOKNZ
Arieldouglas
Brownie
JRiggs
RebStew
14 posters

Page 2 of 2 Previous  1, 2

Go down

Leave the hood emblem on or take it off?

Curious what you would do? - Page 2 I_vote_lcap20%Curious what you would do? - Page 2 I_vote_rcap 20% 
[ 2 ]
Curious what you would do? - Page 2 I_vote_lcap80%Curious what you would do? - Page 2 I_vote_rcap 80% 
[ 8 ]
 
Total Votes : 10
 
 

Curious what you would do? - Page 2 Empty Re: Curious what you would do?

Post by 1/2done February 10th 2012, 1:46 am

RebStew wrote: I wonder what the stuff would look like after 4 years on a car that sits outside though?

You can topcoat with urethane clear after the chrome clear. As long as you seal the edges of the chrome clear with urethane clear I think it would wear like any other BC/CC paint job.
1/2done
1/2done
Mechanic

Number of posts : 282
Registration date : 2007-10-09
Age : 63
Location : S.W. Ohio

Back to top Go down

Curious what you would do? - Page 2 Empty Re: Curious what you would do?

Post by Admin February 10th 2012, 9:54 am

The Eastwood stuff my be worth checking out for sure after I seen the price of a grille. lol Almost $1000.00
Admin
Admin
Admin

Number of posts : 1630
Registration date : 2007-10-09
Age : 108
Location : I'm watching you!

http://www.scroungers.net

Back to top Go down

Curious what you would do? - Page 2 Empty Re: Curious what you would do?

Post by FalconEddie1964 February 10th 2012, 2:26 pm

There's a pair of Chevys from up in Michigan the have the bumpers painted. They've been all over the country and the internet. I've seen them at the Rebel Run, Ducktail, and the Pileup. One's a blue 2 door like your old four door and the other one is a 54 BelAir that's bright green with a silver top. I don't know if they used the same stuff but it sure looked good. That powder coating place up in Piqua has a finish that's a glossy silver that doesn't look too bad.
FalconEddie1964
FalconEddie1964
Blowing fire

Number of posts : 1387
Registration date : 2008-02-06
Age : 45
Location : At the races, top row of the grandstand at about 1000 ft

Back to top Go down

Curious what you would do? - Page 2 Empty Re: Curious what you would do?

Post by Brownie February 10th 2012, 5:39 pm

FalconEddie1964 wrote:There's a pair of Chevys from up in Michigan the have the bumpers painted. They've been all over the country and the internet. I've seen them at the Rebel Run, Ducktail, and the Pileup. One's a blue 2 door like your old four door and the other one is a 54 BelAir that's bright green with a silver top. I don't know if they used the same stuff but it sure looked good. That powder coating place up in Piqua has a finish that's a glossy silver that doesn't look too bad.
I do like the color of the silver powder. They have alot of nice colors now though eastwood.
Powder coating is tricky on them old parts. I have found the out gass causes pitting on the part. You have to use there putty to fill them or just grind it out. You have to preheat the part for it to out gass. Very tuff stuff..We did empty pepsi can. Crushed them! It still didn't come off!
Brownie
Brownie
Scrounger

Number of posts : 941
Registration date : 2011-11-30
Age : 54
Location : Port Charlotte Florida

Back to top Go down

Curious what you would do? - Page 2 Empty Re: Curious what you would do?

Post by FalconEddie1964 February 10th 2012, 6:01 pm

Yeah, up here we have Aesthetic Finishers. They're about 15-20 miles north of Dayton. They have displays at all the big shows in a pretty wide radius. They're set to be able to do something as long as a dragster frame. I talked to them about bumpers last year someplace and if I remember correctly it was about $150 to do a bumper. That's about a quarter of the cost to chrome one and it looks pretty good.
FalconEddie1964
FalconEddie1964
Blowing fire

Number of posts : 1387
Registration date : 2008-02-06
Age : 45
Location : At the races, top row of the grandstand at about 1000 ft

Back to top Go down

Curious what you would do? - Page 2 Empty Re: Curious what you would do?

Post by Sponsored content


Sponsored content


Back to top Go down

Page 2 of 2 Previous  1, 2

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum