Best body filler?
+4
oldman
hotrodaaron77
Brownie
Chris55
8 posters
Best body filler?
Been a while since I did any bodywork, what is the best filler now a days? I used to use Rage. Anyone know of anything better?
Chris55- FL Chapter President
- Number of posts : 1360
Registration date : 2010-04-16
Age : 58
Location : Geneva, Florida
Re: Best body filler?
I use dura glass. It's water proof and if you get on it
Shortly after you apply with a cheese grader file to shape it
Then on to 80 grit. But don't make the mistake of leaving it and not shaping it.... Gets as hard as a rock!
Shortly after you apply with a cheese grader file to shape it
Then on to 80 grit. But don't make the mistake of leaving it and not shaping it.... Gets as hard as a rock!
Brownie- Scrounger
- Number of posts : 941
Registration date : 2011-11-30
Age : 53
Location : Port Charlotte Florida
Re: Best body filler?
We use duraglass over welds elite filler over bodywork and blaze glaze over that if needed
hotrodaaron77- Scrounger
- Number of posts : 473
Registration date : 2010-11-11
Age : 44
Location : Taylor Mill
Re: Best body filler?
I've been using the stuff Wal-mart sells for years with know problem... they have improved the fillers over the years. then I use the green stuff the fill the pin holes or a lot of primer LOL.
oldman- Master mechanic
- Number of posts : 435
Registration date : 2010-12-08
Age : 73
Location : Clarkrange TN.
Re: Best body filler?
A few years ago I switch to All Metal. It's a little pricey but I like it a ton better than anything I have used through the years.
Reb Stew- National President
- Number of posts : 7905
Registration date : 2012-04-08
Age : 104
Location : Looking in your window
Re: Best body filler?
Thanks all, I'm still a ways away from spreading mud, but as I was going through boxes today (looking for 55 parts) I came across an old can of Rage, and it got me wondering if there was anything better.
Chris55- FL Chapter President
- Number of posts : 1360
Registration date : 2010-04-16
Age : 58
Location : Geneva, Florida
Re: Best body filler?
I like the Dynaglass for covering welds or high impact areas, and Dyna Delite for finish work. Ive found that buying good filler pays for itself in sandpaper. Cheap filler clogs paper faster.
Kentucky Kid- S.W. Ky Chapter President
- Number of posts : 119
Registration date : 2011-03-16
Age : 38
Location : Paducah, KY
Re: Best body filler?
Not only that but it spreads a lot better so you go though lessKentucky Kid wrote:I like the Dynaglass for covering welds or high impact areas, and Dyna Delite for finish work. Ive found that buying good filler pays for itself in sandpaper. Cheap filler clogs paper faster.
6-71Kid- Scrounger
- Number of posts : 918
Registration date : 2007-10-10
Age : 37
Location : Dayton Ohio
Re: Best body filler?
all-metal or dyna-glass or Eagle-claw over welds (it is water proof will not absorbed moisture)
and there is always pin holes for moisture to get in to
finish work 3-m Platuim or Rage premium you get what you pay for easy sand and sticks to just about any thing
and there is always pin holes for moisture to get in to
finish work 3-m Platuim or Rage premium you get what you pay for easy sand and sticks to just about any thing
gasser- new kid on the block
- Number of posts : 2
Registration date : 2011-03-02
Age : 62
Location : River Oaks Texas
Similar topics
» no ac box g body
» 28/29 model a body
» Body work
» WHO NEEDS BODY WORK DONE
» Need help with metal body work
» 28/29 model a body
» Body work
» WHO NEEDS BODY WORK DONE
» Need help with metal body work
Permissions in this forum:
You cannot reply to topics in this forum
|
|