welding body panels with a stick
+4
brad
Blue Eyed Devil
RebStew
indygasser
8 posters
Re: welding body panels with a stick
If you are talking about an arc welder I'd grab a mig.
RebStew- Scrounger's Pitbull On Nitrous
- Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky
Re: welding body panels with a stick
Ummmm... No.
Blue Eyed Devil- Devils Advocate
- Number of posts : 759
Registration date : 2007-11-07
Re: welding body panels with a stick
a stick welder burns to hot for sheetmetal unless you were doing frame work stay away from stick, gas welding or brazing is great i'm old school. never used a mig.
brad- new kid on the block
- Number of posts : 2
Registration date : 2011-06-14
Re: welding body panels with a stick
what's this new kid on the block??? i built my first 57 chevy in 1969
brad- new kid on the block
- Number of posts : 2
Registration date : 2011-06-14
Re: welding body panels with a stick
The more you post the wording will change.
RebStew- Scrounger's Pitbull On Nitrous
- Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky
Re: welding body panels with a stick
RebStew wrote: The more you post the wording will change.
....and when you have posted as many times as RebStew it changes to "Banned" but that won't stop him either!
Truxter Fordly- OH Chapter President
- Number of posts : 424
Registration date : 2009-10-21
Age : 65
Location : Loveland, OH
RebStew- Scrounger's Pitbull On Nitrous
- Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky
Re: welding body panels with a stick
I've have tried to use a stitch welder, got it from eastman and works OK. Hooks up to my Lincoln welder just like a stick but you kinda have to play with the adjustments to get it were you want it. I like it just don't use it much. Like the MIG with GAS. Much smoother. The best is a TIG but really kinda cost prohibitive.
F1Hauler- new kid on the block
- Number of posts : 15
Registration date : 2011-05-28
Location : Douglas, Georgia
Re: welding body panels with a stick
I've done it a bunch, LOW amps, small dia 6013 rod...but use a 110V Mig with 75-25 mix will do much much better...flux core wire splatters all over the place....new kids on the block, that's a boy band....wasn't it???
Re: welding body panels with a stick
'Fraid it still is friend
Newbie Nate- Scrounger
- Number of posts : 83
Registration date : 2011-08-03
Age : 35
Location : Maple Grove, MN
Similar topics
» Aluminum welding
» Welding Gloves
» Aluminum Arc Welding
» 1987 Ford F-150 2wd 300 I6 Stick - $1300
» QUARTER STICK SHIFTER W/ DIFFERENT KIND OF COVER
» Welding Gloves
» Aluminum Arc Welding
» 1987 Ford F-150 2wd 300 I6 Stick - $1300
» QUARTER STICK SHIFTER W/ DIFFERENT KIND OF COVER
Permissions in this forum:
You cannot reply to topics in this forum
|
|