PRO BUILT 408 SBC BEST EVERTHINGSTREET OR STRIP 600 HP TRADE
PRO BUILT 408 SBC BEST EVERTHINGSTREET OR STRIP 600 HP TRADE
THERE WAS OVER $12K SPENT TO BUILD THIS MOTOR,, BOLT IN AND GO, RACE OR STREET !!! STILL NEW !!!!!!!!!
FOR A FEW MORE PIC'S COPY AND PASTE THE LINK
http://columbus.craigslist.org/pts/1007915436.html
STILL NEW,,, AND WILL RUN LOW LOW 10'S IN THE QUATER OR STICK PUMP GAS IN IT AND DRIVE AROUND AND MESS WITH YOUR BUDDYS....
This is a **VERY VERY*** FRESH AND READY TO BOLT IN AND GO From INTAKE TO OIL PAN,,,,,, 408 sbc Race or Street Motor that is PRO-BUILT!!!! IT CAN RUN ON PUMP GAS IF NEEDED FOR THE STREET OR GO RUN LOW NUMBERS AT THE TRACK... IT Has the Best of Everthing in it,,,,,,,, 400 CHEVY BLOCK .40 over,, ALSO IT IS A Full Roller Set Up,,,
**** WAY TO MUCH TO LIST BIG HP MOTOR
400 .40 OVER
**** All Forged bottom end,,,
IT IS ALL INTERNALLY BALANCED!!!
$1900 STEEL Calies Crank,,,,,
6in H-BEAM Rods,,,,,,
Billet 4-Bolt Splayed Main Caps,,,,
ARP BOLTS,,,,,,,,,,
SFI Approved Super Damper (fuild Balancer) WITH white timing marks engraved around the balancer,,,,
JE-SRP FORGED 11.1 Cri Flat top Pistons,,,,, WITH BLOCK AND HEADS DECKED MAKES IT JUST AROUND 11.5.1,,,,,,,,,,,,
7 QT OIL PAN,,,,,,, HV OIL PUMP.........
DART Pro-One Alum heads with lots of work done, 64cc 230 runners 2.08 valves, With New COMP Roller Springs,, New Howard Roller Rockers,,,,,,,,,
New Comp 630-630 lift Soild Roller Cam,, And NEW Roller Lifters,,,,,,
PRO BILLET TRUE ROLLER TIMMING CHAIN WITH CAM BUTTON,, TORRINGTON BEARING AND CAM LOCK,,,,,,,,,,
POWDER COATED HOLLEY STRIP INTAKE,,,,,,,,
SHARP LOOKING TALL FABRICATED ALUM VALVE COVERS,,,,,,,,,,,,,,
ELEC WATER PUMP,,,,,,,,,,
MSD DISTRBUTOR WITH WIRES,,,,,,,,,,,,,,
AND ALL THE OTHER GOODIES,,,,,,,,,,,,
(TO MUCH TO LIST) ********575 to 600hp ALL DAY LONG******* My friend made just a few quater mile passes and a couple 8th mile with this 408 this last session in a 3000 pound car,,,,, then he sold the car and kept the motor to stick in another toy but never got around to it so i bought it....... quater mile time was 10.14 at 136mph all motor!!!!!! Have slips to prove,
ONLY $5,500 OBO or trade BOLT IN AND GO RACING OR JUST DRIVE AROUND TOWN AND MESS WITH YOUR BUDDYS LOL THIS IS A GREAT MOTOR!!!!!!!! NO TROUBLES AT ALL TO WORRYY ABOUT,, ITS BUILT TO TO HOLD UP!!!!!
FOR A FEW MORE PIC'S COPY AND PASTE THE LINK
http://columbus.craigslist.org/pts/1007915436.html
STILL NEW,,, AND WILL RUN LOW LOW 10'S IN THE QUATER OR STICK PUMP GAS IN IT AND DRIVE AROUND AND MESS WITH YOUR BUDDYS....
This is a **VERY VERY*** FRESH AND READY TO BOLT IN AND GO From INTAKE TO OIL PAN,,,,,, 408 sbc Race or Street Motor that is PRO-BUILT!!!! IT CAN RUN ON PUMP GAS IF NEEDED FOR THE STREET OR GO RUN LOW NUMBERS AT THE TRACK... IT Has the Best of Everthing in it,,,,,,,, 400 CHEVY BLOCK .40 over,, ALSO IT IS A Full Roller Set Up,,,
**** WAY TO MUCH TO LIST BIG HP MOTOR
400 .40 OVER
**** All Forged bottom end,,,
IT IS ALL INTERNALLY BALANCED!!!
$1900 STEEL Calies Crank,,,,,
6in H-BEAM Rods,,,,,,
Billet 4-Bolt Splayed Main Caps,,,,
ARP BOLTS,,,,,,,,,,
SFI Approved Super Damper (fuild Balancer) WITH white timing marks engraved around the balancer,,,,
JE-SRP FORGED 11.1 Cri Flat top Pistons,,,,, WITH BLOCK AND HEADS DECKED MAKES IT JUST AROUND 11.5.1,,,,,,,,,,,,
7 QT OIL PAN,,,,,,, HV OIL PUMP.........
DART Pro-One Alum heads with lots of work done, 64cc 230 runners 2.08 valves, With New COMP Roller Springs,, New Howard Roller Rockers,,,,,,,,,
New Comp 630-630 lift Soild Roller Cam,, And NEW Roller Lifters,,,,,,
PRO BILLET TRUE ROLLER TIMMING CHAIN WITH CAM BUTTON,, TORRINGTON BEARING AND CAM LOCK,,,,,,,,,,
POWDER COATED HOLLEY STRIP INTAKE,,,,,,,,
SHARP LOOKING TALL FABRICATED ALUM VALVE COVERS,,,,,,,,,,,,,,
ELEC WATER PUMP,,,,,,,,,,
MSD DISTRBUTOR WITH WIRES,,,,,,,,,,,,,,
AND ALL THE OTHER GOODIES,,,,,,,,,,,,
(TO MUCH TO LIST) ********575 to 600hp ALL DAY LONG******* My friend made just a few quater mile passes and a couple 8th mile with this 408 this last session in a 3000 pound car,,,,, then he sold the car and kept the motor to stick in another toy but never got around to it so i bought it....... quater mile time was 10.14 at 136mph all motor!!!!!! Have slips to prove,
ONLY $5,500 OBO or trade BOLT IN AND GO RACING OR JUST DRIVE AROUND TOWN AND MESS WITH YOUR BUDDYS LOL THIS IS A GREAT MOTOR!!!!!!!! NO TROUBLES AT ALL TO WORRYY ABOUT,, ITS BUILT TO TO HOLD UP!!!!!
tiresmoke55- Scrounger
- Number of posts : 98
Registration date : 2007-11-19
Age : 42
Location : silver grove ky
Similar topics
» Old Drag Strip in Somerset.
» drag strip on altimont
» Favorite Style of Car Built
» Old truck I built a few years ago
» Taking a passenger at the drag strip?
» drag strip on altimont
» Favorite Style of Car Built
» Old truck I built a few years ago
» Taking a passenger at the drag strip?
Permissions in this forum:
You cannot reply to topics in this forum