{ Scaring babies and little old ladies with open headers since 1964 }
Welcome to the Scroungers Car Club web site.
It cost nothing to register Sign up and speak up!

Sorry for the wall. This keeps our web site clean of SPAM and other unwanted parties so the true gear heads can enjoy him/her self.
You must register to see most of this forum. Register or if you have already registered just log in to see what's going on.

Join the forum, it's quick and easy

{ Scaring babies and little old ladies with open headers since 1964 }
Welcome to the Scroungers Car Club web site.
It cost nothing to register Sign up and speak up!

Sorry for the wall. This keeps our web site clean of SPAM and other unwanted parties so the true gear heads can enjoy him/her self.
You must register to see most of this forum. Register or if you have already registered just log in to see what's going on.
{ Scaring babies and little old ladies with open headers since 1964 }
Would you like to react to this message? Create an account in a few clicks or log in to continue.

messing around with the new bead roller

+2
John B
cornfield customs
6 posters

Page 1 of 2 1, 2  Next

Go down

messing around with the new bead roller Empty messing around with the new bead roller

Post by cornfield customs August 6th 2010, 1:49 am

so a couple weeks ago i bought a new baileigh power drive bead roller. it is awesome. got a bunch of new dies from mittler bros. for and have been playing with some aluminum sheet. these two pieces turned out ok so i figured i would show them. these are done with 1/4 step roll
going to be doing some other designs in the next few days, i will post pics of them in progress and finished
messing around with the new bead roller 002-8
messing around with the new bead roller 003-6
messing around with the new bead roller 002-7
messing around with the new bead roller 001-8

cornfield customs
wrench fetcher

Number of posts : 133
Registration date : 2010-04-29

Back to top Go down

messing around with the new bead roller Empty Re: messing around with the new bead roller

Post by John B August 6th 2010, 2:02 am

Those could make some killer awards at car shows.
John B
John B
1000 post club

Number of posts : 1028
Registration date : 2007-10-09
Age : 54
Location : Olive Hill,KY

http://www.kustomtrophy.com

Back to top Go down

messing around with the new bead roller Empty Re: messing around with the new bead roller

Post by RebStew August 6th 2010, 3:17 am

Works good.
RebStew
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky

Back to top Go down

messing around with the new bead roller Empty Re: messing around with the new bead roller

Post by JRiggs August 8th 2010, 3:15 am

be cool to have that piston a little smaller and under or above it have scroungers c.c. on it.....i think it would be a cool dragger plate..
JRiggs
JRiggs
Scrounger

Number of posts : 3505
Registration date : 2007-10-09
Age : 44
Location : erlanger ky

Back to top Go down

messing around with the new bead roller Empty Re: messing around with the new bead roller

Post by cornfield customs August 18th 2010, 3:33 am

here are some more i have been playing with. i have more over at the pin stripers shop getting painted up.
messing around with the new bead roller 005-8
messing around with the new bead roller 004-8
messing around with the new bead roller 002-9
messing around with the new bead roller 001-10
messing around with the new bead roller 001-9

cornfield customs
wrench fetcher

Number of posts : 133
Registration date : 2010-04-29

Back to top Go down

messing around with the new bead roller Empty Re: messing around with the new bead roller

Post by cornfield customs August 18th 2010, 3:55 am

messing around with the new bead roller 006-8
messing around with the new bead roller 007-7

cornfield customs
wrench fetcher

Number of posts : 133
Registration date : 2010-04-29

Back to top Go down

messing around with the new bead roller Empty Re: messing around with the new bead roller

Post by John B August 18th 2010, 5:25 pm

You going to have some of that stuff for sale at the Labor Of Love car show on the 28th?
John B
John B
1000 post club

Number of posts : 1028
Registration date : 2007-10-09
Age : 54
Location : Olive Hill,KY

http://www.kustomtrophy.com

Back to top Go down

messing around with the new bead roller Empty Re: messing around with the new bead roller

Post by cornfield customs August 18th 2010, 6:58 pm

i wont be able able to make it to the labor of love show. i would love to come but i dont think my old lady would like me not showing up for our wedding lol.

but this stuff is for sale, or i can make you some custom stuff just let me know

cornfield customs
wrench fetcher

Number of posts : 133
Registration date : 2010-04-29

Back to top Go down

messing around with the new bead roller Empty Re: messing around with the new bead roller

Post by JRiggs August 18th 2010, 7:24 pm

nothing cooler then a wedding at a car show lol
JRiggs
JRiggs
Scrounger

Number of posts : 3505
Registration date : 2007-10-09
Age : 44
Location : erlanger ky

Back to top Go down

messing around with the new bead roller Empty Re: messing around with the new bead roller

Post by cornfield customs August 18th 2010, 7:27 pm

we are having a kind of cruise in at my wedding if that counts lol

cornfield customs
wrench fetcher

Number of posts : 133
Registration date : 2010-04-29

Back to top Go down

messing around with the new bead roller Empty Re: messing around with the new bead roller

Post by JRiggs August 18th 2010, 7:40 pm

thatll work 2...
JRiggs
JRiggs
Scrounger

Number of posts : 3505
Registration date : 2007-10-09
Age : 44
Location : erlanger ky

Back to top Go down

messing around with the new bead roller Empty Re: messing around with the new bead roller

Post by RebStew August 18th 2010, 10:18 pm

cornfield customs wrote:i wont be able able to make it to the labor of love show. i would love to come but i dont think my old lady would like me not showing up for our wedding lol.
Congratulations Mike. A good woman only makes a good man better.
RebStew
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky

Back to top Go down

messing around with the new bead roller Empty Re: messing around with the new bead roller

Post by cornfield customs August 19th 2010, 1:54 am

here are some more for today, i made 3 of the v8 sign. love the way they turned out
messing around with the new bead roller 004-9
messing around with the new bead roller 001-11
messing around with the new bead roller 003-8

cornfield customs
wrench fetcher

Number of posts : 133
Registration date : 2010-04-29

Back to top Go down

messing around with the new bead roller Empty Re: messing around with the new bead roller

Post by RebStew August 19th 2010, 2:13 am

How much are you charging to do those Mike? I may want to have the Scroungers name put on a peice to hang in my garage. I love my bead roller but there is no way I can do that stuff with mine. Very nice work.
RebStew
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky

Back to top Go down

messing around with the new bead roller Empty Re: messing around with the new bead roller

Post by cornfield customs August 19th 2010, 2:21 am

it depends on the size and complexity of the piece. for example the v8 sign is $35 unpainted. and they are roughly 12x25

cornfield customs
wrench fetcher

Number of posts : 133
Registration date : 2010-04-29

Back to top Go down

messing around with the new bead roller Empty Re: messing around with the new bead roller

Post by RebStew August 19th 2010, 2:24 am

Wow that pretty small for such detail. I gonna have to come over and check this thing out. Sounds like a killer shop tool. I may talk to you about getting the Scroungers name done. It would be cool to hang up I think.
RebStew
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky

Back to top Go down

messing around with the new bead roller Empty Re: messing around with the new bead roller

Post by cornfield customs August 20th 2010, 3:26 am

here are some more from today, i am going to re do the 55 sign not real happy with the way it turned out
messing around with the new bead roller 007-8
messing around with the new bead roller 006-9
messing around with the new bead roller 005-9

cornfield customs
wrench fetcher

Number of posts : 133
Registration date : 2010-04-29

Back to top Go down

messing around with the new bead roller Empty Re: messing around with the new bead roller

Post by Rage August 20th 2010, 6:27 am

That stuff is way cool ! Let me know when you start taking orders I have a couple things I'd like to have made , one being just the word Camaro in cursive on metal to hang up in the garage , you should make all you can and take them to cruise ins and shows to sell , nice work !
Rage
Rage
wrench fetcher

Number of posts : 135
Registration date : 2010-06-01
Age : 52
Location : S.E. Indiana

Back to top Go down

messing around with the new bead roller Empty Re: messing around with the new bead roller

Post by cornfield customs August 20th 2010, 2:34 pm

just let me know what all you want and how large and i will make them up, i am already taking orders

cornfield customs
wrench fetcher

Number of posts : 133
Registration date : 2010-04-29

Back to top Go down

messing around with the new bead roller Empty Re: messing around with the new bead roller

Post by JRiggs August 20th 2010, 4:00 pm

what kinda price are u looking to get outta the clay smith one. i like that one a lot....
JRiggs
JRiggs
Scrounger

Number of posts : 3505
Registration date : 2007-10-09
Age : 44
Location : erlanger ky

Back to top Go down

messing around with the new bead roller Empty Re: messing around with the new bead roller

Post by cornfield customs August 20th 2010, 11:14 pm

the clay smith ones i am getting $25 for. i re made the 55 sign today and was much happier with the results and so was the customer
messing around with the new bead roller 001-12

cornfield customs
wrench fetcher

Number of posts : 133
Registration date : 2010-04-29

Back to top Go down

messing around with the new bead roller Empty Re: messing around with the new bead roller

Post by Rage August 21st 2010, 12:21 am

How much for one that just says Camaro in cursive ?

The other piece I would want you would have to see my car to know how to make it if that makes any sense lol , thanks .
Rage
Rage
wrench fetcher

Number of posts : 135
Registration date : 2010-06-01
Age : 52
Location : S.E. Indiana

Back to top Go down

messing around with the new bead roller Empty Re: messing around with the new bead roller

Post by cornfield customs August 21st 2010, 3:35 am

35-40 for the camaro sign, script is a challenge and more labor intensive. i will make one up tomorrow, if you end up not wanting it i am sure i can sell it later on

cornfield customs
wrench fetcher

Number of posts : 133
Registration date : 2010-04-29

Back to top Go down

messing around with the new bead roller Empty Re: messing around with the new bead roller

Post by RebStew August 21st 2010, 8:07 am

Mike was you at Milfold tonight?
RebStew
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky

Back to top Go down

messing around with the new bead roller Empty Re: messing around with the new bead roller

Post by cornfield customs August 21st 2010, 3:29 pm

no i had to go to a wedding, i was not real happy about missing the cruise in lol

cornfield customs
wrench fetcher

Number of posts : 133
Registration date : 2010-04-29

Back to top Go down

messing around with the new bead roller Empty Re: messing around with the new bead roller

Post by Sponsored content


Sponsored content


Back to top Go down

Page 1 of 2 1, 2  Next

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum