{ Scaring babies and little old ladies with open headers since 1964 }
Welcome to the Scroungers Car Club web site.
It cost nothing to register Sign up and speak up!

Sorry for the wall. This keeps our web site clean of SPAM and other unwanted parties so the true gear heads can enjoy him/her self.
You must register to see most of this forum. Register or if you have already registered just log in to see what's going on.

Join the forum, it's quick and easy

{ Scaring babies and little old ladies with open headers since 1964 }
Welcome to the Scroungers Car Club web site.
It cost nothing to register Sign up and speak up!

Sorry for the wall. This keeps our web site clean of SPAM and other unwanted parties so the true gear heads can enjoy him/her self.
You must register to see most of this forum. Register or if you have already registered just log in to see what's going on.
{ Scaring babies and little old ladies with open headers since 1964 }
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Gasser Meets (time to wrench)

5 posters

Page 1 of 2 1, 2  Next

Go down

Gasser Meets (time to wrench) Empty Gasser Meets (time to wrench)

Post by RebStew November 18th 2007, 6:22 pm

Thought I'd post this up so we can try to let everyone see when we are going to do some work on the gasser. anyone that can make it to one of the days/nights we are going to work on it, please do.. we can always use a hand. even if there is not enough room for everyone to do what we are doing that night you can work on something else. sanding the inside, cleaning chrome or whatever.


Last edited by RebStew on March 3rd 2008, 5:16 pm; edited 1 time in total
RebStew
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky

Back to top Go down

Gasser Meets (time to wrench) Empty Re: Gasser Meets (time to wrench)

Post by RebStew November 18th 2007, 6:54 pm

Ryan I wasn't for sure what or when you was wanting to mess with the gasser again. we spoke of Monday but I'm not for sure you will feel like screwing with it after moving a house like you did.
this is going to be a crazy week for me. I can make it out there Monday anytime after 4. after Monday I'm going to be swamped around here till a few days after after Thanksgiving weekend. I have a big family and X mas and turkey day takes over my life every year around this time. work around the house, hanging X-mas lights, putting up the tree shopping and then all the family stuff for Thanksgiving.
let me know if you feel like messing with the gasser on monday. be nice if we could get the front end hung. if we do work on it monday we could use a hand if anyone is free.
RebStew
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky

Back to top Go down

Gasser Meets (time to wrench) Empty Re: Gasser Meets (time to wrench)

Post by LRS30 November 18th 2007, 10:14 pm

Monday is fine....The house is still on its foundation, and we are up against septic tank laws so were gonna make some phone calls but we did get the house jacked up and square which was a major job...I'm good for all day on Monday..
LRS30
LRS30
Forum Junky

Number of posts : 1823
Registration date : 2007-10-09
Age : 54
Location : Burlington KY.

http://www.myspace.com/ryanbfg

Back to top Go down

Gasser Meets (time to wrench) Empty Re: Gasser Meets (time to wrench)

Post by LRS30 November 20th 2007, 3:57 pm

If anyone wants we can do this on the Monday after Thanksgiving as well....Just a thought...
LRS30
LRS30
Forum Junky

Number of posts : 1823
Registration date : 2007-10-09
Age : 54
Location : Burlington KY.

http://www.myspace.com/ryanbfg

Back to top Go down

Gasser Meets (time to wrench) Empty Re: Gasser Meets (time to wrench)

Post by RebStew November 26th 2007, 3:20 am

Ryan I'm not sure if I will be able to make it tomorrow. I'm going to be swamped around here for a few more days.. if I get free I'll call you first before I come. doesn't look good though..
RebStew
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky

Back to top Go down

Gasser Meets (time to wrench) Empty Re: Gasser Meets (time to wrench)

Post by LRS30 November 26th 2007, 3:31 am

No sweat, I'm heading to the gym and then to rehab (again only for my shoulder this time), so maybe Wednesday . I'm trying to get my car to my parents to free up some space for my wife's car.. Keep me posted...
LRS30
LRS30
Forum Junky

Number of posts : 1823
Registration date : 2007-10-09
Age : 54
Location : Burlington KY.

http://www.myspace.com/ryanbfg

Back to top Go down

Gasser Meets (time to wrench) Empty Re: Gasser Meets (time to wrench)

Post by LRS30 November 27th 2007, 10:12 pm

Is anybody opposed to making Wednesday a set date from here on out as the gasser wrench night??? I know with holidays fast approaching it can be rough but maybe if we set a day/night that way we can make arrangements to get some stuff done.My weekends are sketchy at best because of Football and Girls on the Run (which ends Sat. ) and helping out in Somerset with my parents house.So let me know what everyone thinks......Ryan
LRS30
LRS30
Forum Junky

Number of posts : 1823
Registration date : 2007-10-09
Age : 54
Location : Burlington KY.

http://www.myspace.com/ryanbfg

Back to top Go down

Gasser Meets (time to wrench) Empty Re: Gasser Meets (time to wrench)

Post by RebStew November 27th 2007, 11:35 pm

LRS30 wrote:Is anybody opposed to making Wednesday a set date from here on out as the gasser wrench night??? I know with holidays fast approaching it can be rough but maybe if we set a day/night that way we can make arrangements to get some stuff done.My weekends are sketchy at best because of Football and Girls on the Run (which ends Sat. ) and helping out in Somerset with my parents house.So let me know what everyone thinks......Ryan
I'm good with wensdays for now till you get some free time. bad thing is everyone is working on wensday so we are going to be a low on hands. we can do what we can till something breaks. the weekend would be the best bet to gets some help though. we may be able to get some of the ohio guys down to help but not during the week. everyone has to get up to go to work.
RebStew
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky

Back to top Go down

Gasser Meets (time to wrench) Empty Re: Gasser Meets (time to wrench)

Post by LRS30 November 27th 2007, 11:45 pm

yhea that pesky work thing always causes problems....I'm home this weekend afternoon if anybody is game....
LRS30
LRS30
Forum Junky

Number of posts : 1823
Registration date : 2007-10-09
Age : 54
Location : Burlington KY.

http://www.myspace.com/ryanbfg

Back to top Go down

Gasser Meets (time to wrench) Empty Re: Gasser Meets (time to wrench)

Post by 6-71Kid November 28th 2007, 12:29 am

weekend would be better for me but depending on what days we do it during the week I should be able to make it. I got school on Tuesday, Friday, and Saturday morning.
6-71Kid
6-71Kid
Scrounger

Number of posts : 918
Registration date : 2007-10-10
Age : 37
Location : Dayton Ohio

Back to top Go down

Gasser Meets (time to wrench) Empty Re: Gasser Meets (time to wrench)

Post by LRS30 November 28th 2007, 1:06 am

It looks like for tommorow we should have a full house, Steve ,Myself, Ferrell, my brother Kevin, and Cole if he can pull it off. My plan is to get my dead ass out of bed when the kids go to school , get the welder unhooked from Ferrells and move my car from the garage so we have room.And if anybody wants to work on it Sat. or Sun I'm game just let me know...
LRS30
LRS30
Forum Junky

Number of posts : 1823
Registration date : 2007-10-09
Age : 54
Location : Burlington KY.

http://www.myspace.com/ryanbfg

Back to top Go down

Gasser Meets (time to wrench) Empty Re: Gasser Meets (time to wrench)

Post by RebStew November 29th 2007, 7:44 am

thanks guys for the help today.
Ryan and his brother Kevin was there this morning. I left around 3:30 and made it back around 6 or so. Ronnie and Cole showed up to help finish the night with Ryan and me. wasn't a bad day. we need some bushings for the spring eyes to get everything plum before our final welds.
a steering box and arm and four 7/8" bushings and we have the front end licked. Razz
Later Cole stopped in at my house for some late dinner and to help toss a few lights on the Christmas tree. then we went to JRiggs house to hang out a few minutes with him on his birthday.
RebStew
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky

Back to top Go down

Gasser Meets (time to wrench) Empty Re: Gasser Meets (time to wrench)

Post by LRS30 November 29th 2007, 1:50 pm

RebStew wrote:thanks guys for the help today.
Ryan and his brother Kevin was there this morning. I left around 3:30 and made it back around 6 or so. Ronnie and Cole showed up to help finish the night with Ryan and me. wasn't a bad day. we need some bushings for the spring eyes to get everything plum before our final welds.
a steering box and arm and four 7/8" bushings and we have the front end licked. Razz
Later Cole stopped in at my house for some late dinner and to help toss a few lights on the Christmas tree. then we went to JRiggs house to hang out a few minutes with him on his birthday.

Steve we need 8 bushings 4 per spring if were talking the Top Hat style if were talking a straight push in the four would work but were going to have friction wear on the shakles and sping mount where the rub against each outher.Just a thought....
LRS30
LRS30
Forum Junky

Number of posts : 1823
Registration date : 2007-10-09
Age : 54
Location : Burlington KY.

http://www.myspace.com/ryanbfg

Back to top Go down

Gasser Meets (time to wrench) Empty Re: Gasser Meets (time to wrench)

Post by RebStew November 29th 2007, 5:35 pm

I got a call from Ryan this morning. he scored some bushings so we are good on the bushings. his brother Kevin found some that he had stashed away.
RebStew
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky

Back to top Go down

Gasser Meets (time to wrench) Empty Re: Gasser Meets (time to wrench)

Post by LRS30 December 3rd 2007, 9:58 pm

Anybody up for a Tuesday evening, or Wednesday morning/afternoon/evening wrench session? I'm going to get some bolts tommorow sized for the bushings so we can get things in there right spots, and then I can progress forward with the final welding of everything.Just let me know if anybody is up for a few hours of wrenching...Ryan
LRS30
LRS30
Forum Junky

Number of posts : 1823
Registration date : 2007-10-09
Age : 54
Location : Burlington KY.

http://www.myspace.com/ryanbfg

Back to top Go down

Gasser Meets (time to wrench) Empty Re: Gasser Meets (time to wrench)

Post by RebStew December 3rd 2007, 10:16 pm

LRS30 wrote:Anybody up for a Tuesday evening, or Wednesday morning/afternoon/evening wrench session? I'm going to get some bolts tommorow sized for the bushings so we can get things in there right spots, and then I can progress forward with the final welding of everything.Just let me know if anybody is up for a few hours of wrenching...Ryan
I'm free 1 to 6 pm tuesday and or wensday
RebStew
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky

Back to top Go down

Gasser Meets (time to wrench) Empty Re: Gasser Meets (time to wrench)

Post by LRS30 December 3rd 2007, 10:17 pm

Lets shoot for Wednesday again if its cool with you....
LRS30
LRS30
Forum Junky

Number of posts : 1823
Registration date : 2007-10-09
Age : 54
Location : Burlington KY.

http://www.myspace.com/ryanbfg

Back to top Go down

Gasser Meets (time to wrench) Empty Re: Gasser Meets (time to wrench)

Post by RebStew December 3rd 2007, 10:20 pm

LRS30 wrote:Lets shoot for Wednesday again if its cool with you....
sounds good
RebStew
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky

Back to top Go down

Gasser Meets (time to wrench) Empty Re: Gasser Meets (time to wrench)

Post by LRS30 December 5th 2007, 3:43 pm

I'm gonna be home all week and weekend, so if anybody wants to get together and mess with the Falcon let me know....12/5/07, Ryan
LRS30
LRS30
Forum Junky

Number of posts : 1823
Registration date : 2007-10-09
Age : 54
Location : Burlington KY.

http://www.myspace.com/ryanbfg

Back to top Go down

Gasser Meets (time to wrench) Empty Re: Gasser Meets (time to wrench)

Post by LRS30 December 5th 2007, 11:58 pm

I'm gonna play in the garage tommorow 12/06/07 on the gasser if anybody has time to come out if not no biggie, just thought I'd throw it out there...
LRS30
LRS30
Forum Junky

Number of posts : 1823
Registration date : 2007-10-09
Age : 54
Location : Burlington KY.

http://www.myspace.com/ryanbfg

Back to top Go down

Gasser Meets (time to wrench) Empty Re: Gasser Meets (time to wrench)

Post by LRS30 December 10th 2007, 12:43 am

Anybody have any free time this week to do any work on the Falcon ????
LRS30
LRS30
Forum Junky

Number of posts : 1823
Registration date : 2007-10-09
Age : 54
Location : Burlington KY.

http://www.myspace.com/ryanbfg

Back to top Go down

Gasser Meets (time to wrench) Empty Re: Gasser Meets (time to wrench)

Post by RebStew December 10th 2007, 1:08 am

LRS30 wrote:Anybody have any free time this week to do any work on the Falcon ????
i may
RebStew
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky

Back to top Go down

Gasser Meets (time to wrench) Empty Re: Gasser Meets (time to wrench)

Post by LRS30 December 11th 2007, 12:29 am

I'm gonna be on the D.L. Tuesday but should be game for a Wednesday the 12th garage session if anybody is game , let me know I will have the garage warm and toasty....
LRS30
LRS30
Forum Junky

Number of posts : 1823
Registration date : 2007-10-09
Age : 54
Location : Burlington KY.

http://www.myspace.com/ryanbfg

Back to top Go down

Gasser Meets (time to wrench) Empty Re: Gasser Meets (time to wrench)

Post by RebStew December 17th 2007, 10:43 am

thanks on the help today with the engine Ryan and Jonathan.
RebStew
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky

Back to top Go down

Gasser Meets (time to wrench) Empty Re: Gasser Meets (time to wrench)

Post by LRS30 December 18th 2007, 4:59 am

going wednesday to fill the argon anybody have time to do some cutting and grinding this week????
LRS30
LRS30
Forum Junky

Number of posts : 1823
Registration date : 2007-10-09
Age : 54
Location : Burlington KY.

http://www.myspace.com/ryanbfg

Back to top Go down

Gasser Meets (time to wrench) Empty Re: Gasser Meets (time to wrench)

Post by Sponsored content


Sponsored content


Back to top Go down

Page 1 of 2 1, 2  Next

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum