{ Scaring babies and little old ladies with open headers since 1964 }
Welcome to the Scroungers Car Club web site.
It cost nothing to register Sign up and speak up!

Sorry for the wall. This keeps our web site clean of SPAM and other unwanted parties so the true gear heads can enjoy him/her self.
You must register to see most of this forum. Register or if you have already registered just log in to see what's going on.

Join the forum, it's quick and easy

{ Scaring babies and little old ladies with open headers since 1964 }
Welcome to the Scroungers Car Club web site.
It cost nothing to register Sign up and speak up!

Sorry for the wall. This keeps our web site clean of SPAM and other unwanted parties so the true gear heads can enjoy him/her self.
You must register to see most of this forum. Register or if you have already registered just log in to see what's going on.
{ Scaring babies and little old ladies with open headers since 1964 }
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Scroungers C.C. 1964 Falcon Drag Car

+28
1/2done
xycho_wraith
Cratethis
LOCO64
silveradolady
puddin head
The Skirt
Admin
falconwagon62
fuel10922
46underconstruction
Lady rebel
FalconEddie1964
tc fairlane
RustyKarr
junkyard junky
big dogs 42
magicman_1968
nitrowarrior
tiresmoke55
chev_hotrod
junkyardjeff
1.8t89Jetta
Mr. Fabulous
LRS30
JRiggs
6-71Kid
RebStew
32 posters

Page 3 of 14 Previous  1, 2, 3, 4 ... 8 ... 14  Next

Go down

Scroungers C.C. 1964 Falcon Drag Car - Page 3 Empty Re: Scroungers C.C. 1964 Falcon Drag Car

Post by nitrowarrior December 4th 2007, 5:31 am

I'm stuck in the central part of Arizona.....I never know what's available in other parts of the country. 351W's are plentiful here. I have found in the last 7 years an abundance of "X" blocks. Very strong and seasoned. High nickel content. I just acuired one for my I/O boat to replace the 302 sitting in it now. It would be nice to find a good 4bbl Cleveland for the project too. I guess you're not seeing many over there?
nitrowarrior
nitrowarrior
new kid on the block

Number of posts : 14
Registration date : 2007-11-29

Back to top Go down

Scroungers C.C. 1964 Falcon Drag Car - Page 3 Empty Re: Scroungers C.C. 1964 Falcon Drag Car

Post by RebStew December 4th 2007, 5:48 am

nitrowarrior wrote:good 4bbl Cleveland for the project too. I guess you're not seeing many over there?
lol no I haven't seen a 351 V4 C in a long time. not even in a running car around here unless it's someones hot rod at a cruise. I guess the cars rotted away and they scrapped 'em around here. you can't hardly find anything easy around here anymore. guess it matter where you live , like you said. around 10 years ago I moved to FL for a while. I was shocked to see all the mavericks and pintos running around down there. lol I thought to myself "so this is where they all went to" lol. winter is rough on the cars around here. we are at the northern most part of Kentucky. I'm almost on the Ohio River. from my back window I can see Cincinatti Ohio. winter is not as bad as upper New York but we get our fair share. they care calling for snow in the next couple days. I guess it still pretty warm in AZ?
RebStew
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky

Back to top Go down

Scroungers C.C. 1964 Falcon Drag Car - Page 3 Empty Re: Scroungers C.C. 1964 Falcon Drag Car

Post by nitrowarrior December 4th 2007, 6:04 am

This weekend provided some much needed rain and cold temps. Yesterday was cool but got up to 68. Today it hit 75. Sometimes we have the greatest winters and other times we stand around looking at each other going WHAT???? We do have an enormous amount of salvage yards and specialty yards to get what we want in the odd builds. Prices are competitive to each other to keep business steady. Good help on the hot lines too so you don't have to run around looking. You can go righ to the yard that has your stuff.
nitrowarrior
nitrowarrior
new kid on the block

Number of posts : 14
Registration date : 2007-11-29

Back to top Go down

Scroungers C.C. 1964 Falcon Drag Car - Page 3 Empty Re: Scroungers C.C. 1964 Falcon Drag Car

Post by LRS30 December 5th 2007, 3:00 am

I stopped today and bought some bolts for the spring's I'm still on the fence about going down to the lake this weekend...If I don't I will post it in the morn. and I will be in the garage if anybody wants to stop by, it all depends on my brothers plan's......Ryan
LRS30
LRS30
Forum Junky

Number of posts : 1823
Registration date : 2007-10-09
Age : 54
Location : Burlington KY.

http://www.myspace.com/ryanbfg

Back to top Go down

Scroungers C.C. 1964 Falcon Drag Car - Page 3 Empty vega converter

Post by magicman_1968 December 5th 2007, 2:57 pm

If you decide to go with a chevy engine and trans,i have a good vega converter to donate to the project.
magicman_1968
magicman_1968
Scroungers Road Captain

Number of posts : 1372
Registration date : 2007-10-15
Age : 52
Location : Newport,Ky

Back to top Go down

Scroungers C.C. 1964 Falcon Drag Car - Page 3 Empty Re: Scroungers C.C. 1964 Falcon Drag Car

Post by RebStew December 5th 2007, 3:17 pm

ALL RIGHT!!! cooool! thanks Joe! that will help the gasser along in a big way.
RebStew
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky

Back to top Go down

Scroungers C.C. 1964 Falcon Drag Car - Page 3 Empty Re: Scroungers C.C. 1964 Falcon Drag Car

Post by LRS30 December 5th 2007, 10:02 pm

ALTERED-WHEELBASE MADNESS
http://www.maxchevy.com/tech/2007/ii_9-nova-2.html

Here is a good article for altered cars.....
LRS30
LRS30
Forum Junky

Number of posts : 1823
Registration date : 2007-10-09
Age : 54
Location : Burlington KY.

http://www.myspace.com/ryanbfg

Back to top Go down

Scroungers C.C. 1964 Falcon Drag Car - Page 3 Empty Re: Scroungers C.C. 1964 Falcon Drag Car

Post by LRS30 December 12th 2007, 11:10 pm

My brother Kevin, Steve, and myself did the final measurements,installed the spring bushings and bolts and finished up by welding everything. The Falcon is sitting pretty good right now, we are ready to move onto the next, step engine installation. Once we get the cherry picker we can move forward in this department, does anybody have a old turbo 350 we can use for mock up, can be an empty case, dowes not need to be a complete trans....Were moving along, one step at a time its really starting to pull together, thanks again to all who have donated parts to this project, and donated time.
LRS30
LRS30
Forum Junky

Number of posts : 1823
Registration date : 2007-10-09
Age : 54
Location : Burlington KY.

http://www.myspace.com/ryanbfg

Back to top Go down

Scroungers C.C. 1964 Falcon Drag Car - Page 3 Empty Re: Scroungers C.C. 1964 Falcon Drag Car

Post by RebStew December 13th 2007, 4:09 am

I just got a junk 350 turbo for mock up. I'm in the middle of ripping the guts out of it now. it cost me $5.00 and 2 soda pops from the junkman, Kenny. Very Happy
RebStew
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky

Back to top Go down

Scroungers C.C. 1964 Falcon Drag Car - Page 3 Empty Re: Scroungers C.C. 1964 Falcon Drag Car

Post by RebStew December 13th 2007, 10:21 pm

I got the trans gutted, cleaned up and painted. no I don't like greasy parts. lol .
we have a mock up trans now. this should be good for making the cross member, driveshaft length and how much the tunnel will have to be cut for the bellhousing to clear. we are still in need of a good turbo 350 so if anyone finds a good one, cheap let me know. Cole may have one but we haven't had time to look yet.
Scroungers C.C. 1964 Falcon Drag Car - Page 3 Picture730
RebStew
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky

Back to top Go down

Scroungers C.C. 1964 Falcon Drag Car - Page 3 Empty Re: Scroungers C.C. 1964 Falcon Drag Car

Post by LRS30 December 13th 2007, 10:39 pm

OOOOHHHHHHHHHH Pretty color red, it should go good with the oil stanied floor in my gargage..
LRS30
LRS30
Forum Junky

Number of posts : 1823
Registration date : 2007-10-09
Age : 54
Location : Burlington KY.

http://www.myspace.com/ryanbfg

Back to top Go down

Scroungers C.C. 1964 Falcon Drag Car - Page 3 Empty Re: Scroungers C.C. 1964 Falcon Drag Car

Post by RebStew December 17th 2007, 10:56 am

Ryan and Jonathan stopped in today and started ripping the 350 apart to see what we have to work with. Corey joined in and got greasy too. before we got started we had problems. 2 of the flywheel bolts rounded off. we tried everything. heat, different sockets, beating the next size smaller one on, vise grips and so on. I was about ready to grind the heads off when we figured we would weld a junk wrench on it. between the heat and welded wrench they came loose. Very Happy
I'm happy to say the the walls looked outstanding. they should clean up nice with just a hone and will not need bored. the bottom end is still buttoned up so I can't say how the crank looks yet. so far so good though.
RebStew
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky

Back to top Go down

Scroungers C.C. 1964 Falcon Drag Car - Page 3 Empty Re: Scroungers C.C. 1964 Falcon Drag Car

Post by LRS30 January 24th 2008, 4:02 am

Thanks To BIG-DOG 42 for stoping out and giving me and REB-STEW the finner point's of working on a Ford...He said all we need is a big sledge hammmer and a wallet full of money...Just teasing Ford guy's.. But we did get the steering mocked up and it work's pretty damn good if I say so myself...With this step out of the way we are onto motor mock-up I would like to set Wednesday of next week to maybe do some work if anybody is interested...
LRS30
LRS30
Forum Junky

Number of posts : 1823
Registration date : 2007-10-09
Age : 54
Location : Burlington KY.

http://www.myspace.com/ryanbfg

Back to top Go down

Scroungers C.C. 1964 Falcon Drag Car - Page 3 Empty Re: Scroungers C.C. 1964 Falcon Drag Car

Post by RebStew January 24th 2008, 4:04 am

I'll be there
RebStew
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky

Back to top Go down

Scroungers C.C. 1964 Falcon Drag Car - Page 3 Empty Re: Scroungers C.C. 1964 Falcon Drag Car

Post by chev_hotrod January 24th 2008, 4:05 am

SORRY GUYS I FORGOT ALL ABOUT IT I AM GETTING OLD LOL NEXT WED PLEASE REMIND THIS OLD MAN ..... lol!
chev_hotrod
chev_hotrod
Scrounger

Number of posts : 462
Registration date : 2007-10-09
Age : 53
Location : independence ,ky

Back to top Go down

Scroungers C.C. 1964 Falcon Drag Car - Page 3 Empty Re: Scroungers C.C. 1964 Falcon Drag Car

Post by LRS30 January 24th 2008, 4:15 am

chev_hotrod wrote:SORRY GUYS I FORGOT ALL ABOUT IT I AM GETTING OLD LOL NEXT WED PLEASE REMIND THIS OLD MAN ..... lol!
Sure thats what they all say...I heard you were afraid to come out because you might get drool on my Chevy Razz
LRS30
LRS30
Forum Junky

Number of posts : 1823
Registration date : 2007-10-09
Age : 54
Location : Burlington KY.

http://www.myspace.com/ryanbfg

Back to top Go down

Scroungers C.C. 1964 Falcon Drag Car - Page 3 Empty Re: Scroungers C.C. 1964 Falcon Drag Car

Post by chev_hotrod January 24th 2008, 4:20 am

LRS30 wrote:
chev_hotrod wrote:SORRY GUYS I FORGOT ALL ABOUT IT I AM GETTING OLD LOL NEXT WED PLEASE REMIND THIS OLD MAN ..... lol!
Sure thats what they all say...I heard you were afraid to come out because you might get drool on my Chevy Razz
brother that is the truth i DROOL over them 50 chebby,s
chev_hotrod
chev_hotrod
Scrounger

Number of posts : 462
Registration date : 2007-10-09
Age : 53
Location : independence ,ky

Back to top Go down

Scroungers C.C. 1964 Falcon Drag Car - Page 3 Empty Re: Scroungers C.C. 1964 Falcon Drag Car

Post by RebStew January 24th 2008, 4:23 am

just not 55's with posts Laughing yeap we was talking about you tonight lol
RebStew
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky

Back to top Go down

Scroungers C.C. 1964 Falcon Drag Car - Page 3 Empty 64 falcon drag car

Post by big dogs 42 January 24th 2008, 6:09 am

I got to help you chebby guys out Very Happy The only thing your ever use on a ford is the rear end cause their the best sooner or latter you'll learn to use all of those fords for fun the older we get the wiser. Im confident youll come around. silent fire them keyboards up!!!! lol!
big dogs 42
big dogs 42
1000 post club

Number of posts : 1145
Registration date : 2007-12-14
Age : 69
Location : corbin ky

Back to top Go down

Scroungers C.C. 1964 Falcon Drag Car - Page 3 Empty Re: Scroungers C.C. 1964 Falcon Drag Car

Post by tiresmoke55 January 24th 2008, 12:26 pm

RebStew wrote:just not 55's with posts Laughing yeap we was talking about you tonight lol

I do hope you guys Know i was just playing around when i said that......
tiresmoke55
tiresmoke55
Scrounger

Number of posts : 98
Registration date : 2007-11-19
Age : 42
Location : silver grove ky

Back to top Go down

Scroungers C.C. 1964 Falcon Drag Car - Page 3 Empty Re: Scroungers C.C. 1964 Falcon Drag Car

Post by LRS30 January 24th 2008, 2:28 pm

Thats the whole point of this guy's was just to razz each other I don't think anbody takes anything personal, except maybe those Ford Freak's......I mean come on I drive a granny car for crap sakes.....
LRS30
LRS30
Forum Junky

Number of posts : 1823
Registration date : 2007-10-09
Age : 54
Location : Burlington KY.

http://www.myspace.com/ryanbfg

Back to top Go down

Scroungers C.C. 1964 Falcon Drag Car - Page 3 Empty 64 falcon drag car

Post by big dogs 42 January 24th 2008, 4:14 pm

Us ford freaks dont take it seriously we are just trying to have a little fun with you chebby guys. confused Hell i haven't said anything about rice rockets or Chrysler's and Dodges wait till we start on them !! :bball: Ever payed any attention to a Honda car with a loud muffler when it shifts it says Honnnn-Daaaaa!!! and cant put much faith in Chrysler's products when they have a starter that sounds like a worn out Maytag need i say more I'm a equal opportunity type guy!!!! thats poking fun Aah SO any one know where i can find a yugo i want to pro street it lol!
big dogs 42
big dogs 42
1000 post club

Number of posts : 1145
Registration date : 2007-12-14
Age : 69
Location : corbin ky

Back to top Go down

Scroungers C.C. 1964 Falcon Drag Car - Page 3 Empty Re: Scroungers C.C. 1964 Falcon Drag Car

Post by Mr. Fabulous January 24th 2008, 4:33 pm

Steve's little baby Toyota is about the same size!!!
Mr. Fabulous
Mr. Fabulous
Blowing fire

Number of posts : 2042
Registration date : 2007-10-10
Age : 36
Location : 2500 miles East of LA

Back to top Go down

Scroungers C.C. 1964 Falcon Drag Car - Page 3 Empty Re: Scroungers C.C. 1964 Falcon Drag Car

Post by RebStew January 24th 2008, 6:34 pm

that would be Amy's Very Happy I'll stick with my redneck GMC truck
RebStew
RebStew
Scrounger's Pitbull On Nitrous

Number of posts : 12420
Registration date : 2007-10-09
Age : 95
Location : Newport Ky

Back to top Go down

Scroungers C.C. 1964 Falcon Drag Car - Page 3 Empty Re: Scroungers C.C. 1964 Falcon Drag Car

Post by LRS30 January 25th 2008, 12:36 am

RebStew wrote:that would be Amy's Very Happy I'll stick with my redneck GMC truck
GMC does that stand for Gay Man Cruiser?????
LRS30
LRS30
Forum Junky

Number of posts : 1823
Registration date : 2007-10-09
Age : 54
Location : Burlington KY.

http://www.myspace.com/ryanbfg

Back to top Go down

Scroungers C.C. 1964 Falcon Drag Car - Page 3 Empty Re: Scroungers C.C. 1964 Falcon Drag Car

Post by Sponsored content


Sponsored content


Back to top Go down

Page 3 of 14 Previous  1, 2, 3, 4 ... 8 ... 14  Next

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum